JUS H B8 204-1984 Acetic acid for industrial use Determination of crystallizingpoint《工业用乙酸 结晶点测定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

HB 649-1979 加工轻合金用两齿直柄立铣刀 D=6~10mm.pdf

HB 650-1979 粗齿直柄立铣刀 d＝2-20mm.pdf

HB 651-1979 细齿直柄立铣刀 d＝3-20mm.pdf

HB 652-1979 加工轻合金用两齿锥形立铣刀 D=12~16mm.pdf

HB 653-1979 加工轻合金用两齿锥柄立铣刀 d＝18-50mm.pdf

HB 655-1979 加工轻合金用三齿锥柄主铣刀 D=14~16mm.pdf

HB 656-1979 加工轻合金用三齿锥柄立铣刀 d＝18-50mm.pdf

HB 658-1979 粗齿锥柄立铣刀 d＝14-50mm.pdf

HB 7025.11-1994 夹具通用元件支承件.直角支座.pdf