JUS M B5 138-1987 Pipe and rubber hoses connections Quick connect Three-ways reducing coupling Assembly《管道及橡胶管连接 快速连接 三向简化耦合 装配》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

JUS L R0 103-1980 Ekctrical office machines Safety isokting transformers Additional requirements《电子办公设备 安全隔离变压器 附加要求》.pdf

JUS M A0 001-1978 Standard reference temperature for industrial length measurements《工业长度测量标准参考温度》.pdf

JUS M A0 065-1977 Drawingsfor mechanical engincering Representing od surface quality of industrial products《机械工程技术图 工业产品表面质量表述》.pdf

JUS M A0 072-1984 Technical drawings for mechanical engineering Conventional npresentation of threaded parts《机械工程技术图 螺纹部件惯用表述》.pdf

JUS M A0 073-1984 Technical drawings for mechanical engineering - Representation ofsprings《机械工程技术图 弹簧表述》.pdf

JUS M A0 074-1984 Technical drawings for mechanical engineering - Conventional representation ofgears《机械工程技术图 设备惯用表述》.pdf

JUS M A0 077-1985 Technical dravvings I tem references《技术图纸 项目参考》.pdf

JUS M A0 100-1979 Process measurement control junctions and instrumentation - Symbolic representation Basic reguirements《加工测量控制连接及仪器 符号代表 基本要求》.pdf

JUS M A1 010-1983 Surface roughness Terminology Surface and its parameters《表面粗糙程度 术语 表面及其参数》.pdf