JUS N N6 024-1982 Radiocommunications Radio receivers for various classes ofemission Methods ofmeasurement Survey ofinput arrangements for magnetic aerials《无线电通讯 各类发射用无线电接收器 测量方法 调.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN 10225-2009 en Weldable structural steels for fixed offshore structures - Technical delivery conditions《固定式近海结构的可焊接结构钢 技术交付条件》.pdf

EN 10226-1-2004 en Pipe threads where pressure tight joints are made on the threads - Part 1 Taper external threads and parallel internal threads - Dimensions tolerances and design.pdf

EN 10226-2-2005 en Pipe threads where pressure tight joints are made on the threads - Part 2 Taper external threads and taper internal threads - Dimensions tolerances and designati.pdf

EN 10226-3-2005 en Pipes threads where pressure tight joint are made on the threads - Part 3 Verification by means of limit gauges《螺纹上有压力密封接缝的管螺纹 第3部分 用极限量规验证》.pdf

EN 10228-1-2016 en Non-destructive testing of steel forgings - Part 1 Magnetic particle inspection《钢锻件的无损检验-第1部分 磁粉探伤》.pdf

EN 10228-2-1998 Non-Destructive Testing of Steel Forgings - Part 2 Penetrant Testing《钢锻件的无损检验 第2部分 渗透检验》.pdf

EN 10228-2-2016 en Non-destructive testing of steel forgings - Part 2 Penetrant testing《钢锻件的无损检验-第2部分 渗透试验》.pdf

EN 10228-3-1998 Non-Destructive Testing of Steel Forgings - Part 3 Ultrasonic Testing of Ferritic or Martensitic Steel Forgings《钢锻件无损检验 第3部分 铁素体或马氏体钢锻件超声检验》.pdf

EN 10228-3-2016 en Non-destructive testing of steel forgings - Part 3 Ultrasonic testing of ferritic or martensitic steel forgings《钢锻件的无损检验-第3部分 铁素体或马氏体钢锻件的超声波检验》.pdf