JUS N R2 623-1980 Polar tantalum ekctrolytic capacitors mth sintered anode and solid ekctrolyte coated with epoxy resin (Type 3) 2 5 to 50 Vd c Climatic severities 55 085 21《带烧结阳极和.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

HB 3502-1985 带导柱的锥面锪钻 d＝2.4~12.9mm.pdf

HB 3503-1985 导柱 d＝2.7~44mm.pdf

HB 3506-1985 锪蒙皮孔用的粗齿锪钻 d＝10~22mm.pdf

HB 3507-1985 锪蒙皮孔用的粗齿锪钻 d＝23~30mm.pdf

HB 3508-1985 锪蒙皮孔用的粗齿锪钻 d＝31~100mm.pdf

HB 3509-1985 锪蒙皮孔用的细齿锪钻 d＝10~22mm.pdf

HB 3510-1985 锪蒙皮孔用的细齿锪钻 d＝23~30mm.pdf

HB 3513-1985 通孔用五棱直柄机用铰刀 d＝1~2.8mm.pdf

HB 3514-1985 通孔用单齿直柄机用铰刀 d＝1~2.8mm.pdf