JUS N S5 201-1987 Characteristics of focal spots in diagnostic X-ray tube assemblies for medical use《医学诊断用X射线管装置的焦斑特性》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DLA MS21279 REV B NOTICE 1-1999 BOLT MACHINE - STEEL DOUBLE HEXAGON EXTENDED WASHER 190-32 (MIL-S-8879) (ASG)《(ASG)0 190-32 (MIL-S-8879)伸出垫圈双六边形钢机器螺栓》.pdf

DLA MS21279 REV B-1963 BOLT MACHINE - STEEL DOUBLE HEXAGON EXTENDED WASHER 190-32 (MIL-S-8879) (ASG)《(ASG)0 190-32 (MIL-S-8879)伸出垫圈双六边形钢机器螺栓》.pdf

DLA MS21292 REV B NOTICE 2-1997 BOLT MACHINE - STEEL DRILLED DOUBLE HEXAGON EXTENDED WASHER 4375-20 (MIL-S-8879 THREAD)《0 4375-20 (MIL-S-8879螺纹)伸出垫圈双六边形带扳手孔的钢机器螺栓》.pdf

DLA MS21292 REV B VALID NOTICE 1-1991 BOLT MACHINE - STEEL DRILLED DOUBLE HEXAGON EXTENDED WASHER 4375-20 (MIL-S-8879 THREAD)《0 4375-20 (MIL-S-8879螺纹)伸出垫圈双六边形带扳手孔的钢机器螺栓》.pdf

DLA MS21292 REV B-1963 BOLT MACHINE - STEEL DRILLED DOUBLE HEXAGON EXTENDED WASHER 4375-20 (MIL-S-8879 THREAD)《0 4375-20 (MIL-S-8879螺纹)伸出垫圈双六边形带扳手孔的钢机器螺栓》.pdf

DLA MS21294 REV B NOTICE 2-1997 BOLT MACHINE - STEEL DRILLED DOUBLE HEXAGON EXTENDED WASHER 5625-18 (MIL-S-8879 THREAD)《0 5625-18 (MIL-S-8879螺纹)伸出垫圈双六边形带扳手孔的钢机器螺栓》.pdf

DLA MS21294 REV B VALID NOTICE 1-1991 BOLT MACHINE - STEEL DRILLED DOUBLE HEXAGON EXTENDED WASHER 5625-18 (MIL-S-8879 THREAD)《0 5625-18 (MIL-S-8879螺纹)伸出垫圈双六边形带扳手孔的钢机器螺栓》.pdf

DLA MS21294 REV B-1963 BOLT MACHINE - STEEL DRILLED DOUBLE HEXAGON EXTENDED WASHER 5625-18 (MIL-S-8879 THREAD)《0 5625-18 (MIL-S-8879螺纹)伸出垫圈双六边形带扳手孔的钢机器螺栓》.pdf

DLA MS21301 REV B NOTICE 1-1999 SCREW SHOULDERED HEX-SOCKET HEAD 375 500 625 UNC-3A UNPLATED《未镀金属的六角凹头螺钉0 375 0 500 0 625 UNC-3A带肩螺丝》.pdf