JUS N S8 031-1977 Method of test for ascertainment ofmaximum experimental safe gap《最大试验安全间隙的测定方法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN ISO 11093-1-1998 Paper and board - Testing of cores - Part 1 Sampling (ISO 11093-1 1994)《纸和纸板 卷轴芯的试验 第1部分 取样》.pdf

DIN ISO 11093-2-1998 Paper and board - Testing of cores - Part 2 Conditioning of test samples (ISO 11093-2 1994)《纸和纸板 卷轴芯的试验 第2部分 试样的调节处理》.pdf

DIN ISO 11093-3-1998 Paper and board - Testing of cores - Part 3 Determination of moisture content using the oven-dry method (ISO 11093-3 1994)《纸和纸板 卷轴芯的试验 第3部分 用烘干法测定水分含量》.pdf

DIN ISO 11093-4-2017 Paper and board - Testing of cores - Part 4 Measurement of dimensions (ISO 11093-4 2016)《纸和纸板 卷轴芯的试验 第4部分 尺寸测量(ISO 11093-4-2016)》.pdf

DIN ISO 11093-5-2017 Paper and board - Testing of cores - Part 5 Determination of characteristics of concentric rotation (ISO 11093-5 2016)《纸和纸板 卷轴芯试验 第5部分 同心旋转特性测定(ISO 11093-5-201.pdf

DIN ISO 11093-6-2005 Paper and board - Testing of cores - Part 6 Determination of bending strength by the three-point method (ISO 11093-6 2005)《纸和纸板 纸芯的检测 第6部分 用三点法测定抗弯强度》.pdf

DIN ISO 11093-7-2012 Paper and board - Testing of cores - Part 7 Determination of flexural modulus by the three-point method (ISO 11093-7 2011)《纸和纸板 芯层试验 第7部分 采用三点法对挠曲模量的测定(ISO 110.pdf

DIN ISO 11093-8-2016 Paper and board - Testing of cores - Part 8 Determination of natural frequency and flexural modulus by experimental modal analysis (ISO 11093-8 2012 + Cor 1 20.pdf

DIN ISO 11093-9-2007 Paper and board - Testing of cores - Part 9 Determination of flat crush resistance (ISO 11093-9 2006) English version of DIN ISO 11093-9 2007-02《纸张和纸板 卷轴芯的试验 第.pdf