MSZ 07 203 7-1979 《职业技术学校教学楼设计标准》.pdf

相关资源

MSZ 04 203 3-1979 《职业技术学校教学楼的设计标准》.pdf

猜你喜欢

FORD WSK-M4D693-A1-2011 THERMOPLASTIC POLYESTER-ETHER ELASTOMER (TEEE) 55 DUROMETER D HARDNESS INJECTION MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《硬度计显示硬度为D55的乙醚弹性体(T.pdf

FORD WSK-M4D693-A2-2011 THERMOPLASTIC POLYESTER-ETHER ELASTOMER (TEEE) 55 DUROMETER D HARDNESS BLACK INJECTION MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD.pdf

FORD WSK-M4D694-A-2011 THERMOPLASTIC POLYESTER-ETHER ELASTOMER (TEEE) 63 DUROMETER D HARDNESS MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《硬度计显示硬度为D63的乙醚弹性体(TEEE)模塑材料热塑性.pdf

FORD WSK-M4D695-A-2010 POLYETHYLENE (PE) MOLDING COMPOUND HIGH DENSITY LOW MELT FLOW RATE TO BE USED WITH FORD WSS-M99P1111-A 《高密度低熔态流动性聚乙烯(PE)模塑材料 与福特WSS-M99P1111-A 一起使用》.pdf

FORD WSK-M4D696-A-2010 POLYETHYLENE (PE) MOLDING COMPOUND HIGH DENSITY OIL IMPREGNATED TO BE USED WITH FORD WSS-M99P1111-A 《油浸渍的高密度聚乙烯（PE）成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSK-M4D697-A1-2008 ABS POLYCARBONATE BLEND (ABS+PC) HIGH IMPACT STRENGTH HIGH HEAT MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部用丙烯腈-丁二烯-苯乙烯共聚物(ABS) 聚碳酸酯混合物(ABS.pdf

FORD WSK-M4D697-A2-2008 ABS POLYCARBONATE BLEND (ABS+PC) HIGH IMPACT STRENGTH HIGH HEAT MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSK-M4D697-A1.pdf

FORD WSK-M4D697-A3-2008 ABS + POLYCARBONATE BLEND (ABS+PC) HIGH IMPACT STRENGTH HIGH HEAT MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《丙烯腈-丁二烯-苯乙烯(ABS)+聚碳酸酯(ABS.pdf

FORD WSK-M4D698-A-2010 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 33 DUROMETER D HARDNESS MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《硬度为33 D的热塑性聚烯烃(TPO)弹性体成型料 与标准FORD W.pdf