MSZ 22 521-1981 《颗粒金刚石刀片特征尺寸》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

KS M ISO 8307-2008 Flexible cellular polymeric materials－Determination of resilience by ball rebound《软泡沫塑料聚合材料 回强性测定》.pdf

KS M ISO 8308-2008 Rubber and plastics hoses and tubing－Determination of transmission of liquids through hose and tubing walls《橡胶和塑料软管和管系 软管和管壁的透液量的测定》.pdf

KS M ISO 8330-2009 Rubber and plastics hoses and hose assemblies－Vocabulary《橡胶和塑料软管及软管组件 词汇》.pdf

KS M ISO 8331-2009 Rubber and plastics hoses and hose assemblies－ 《橡胶和塑料软管和软管组件 选择、贮存、使用和维护指南》.pdf

KS M ISO 845-2012 Cellular plastics and rubbers－Determination of apparent density《泡沫橡胶和塑料 表观密度的测定》.pdf

KS M ISO 8504-1-2012 Preparation of steel substrates before application of paints and related products－Surface preparation methods－Part 1：General principles《涂料和有关产品使用前钢衬底的制备 表面制备方法.pdf

KS M ISO 8504-2-2012 Preparation of steel substrates before application of paints and related products－Surface preparation methods－Part 2：Abrasive blast-cleaning《涂料和有关产品使用前钢衬底的制备 表.pdf

KS M ISO 8510-2-2012 Adhesives－Peel test for a flexible-bonded-to-rigid test specimen assembly－Part 2：180 peel《粘合剂 软硬粘结试样组件剥离试验 第2部分 180度剥离》.pdf

KS M ISO 8511-2007 Rubber compounding ingredients－Carbon black－Determination of pellet size distribution《橡胶配合剂 炭黑球团粒度分布测定》.pdf