MSZ 844-1949 《三角》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM F118-2013 Standard Definitions of Terms Relating to Gaskets《垫圈相关术语的标准定义》.pdf

ASTM F119-1982(2002) Standard Test Method for Rate of Grease Penetration of Flexible Barrier Materials (Rapid Method)《挠性阻挡层材料润滑脂渗透率的试验方法》.pdf

ASTM F119-1982(2008) Standard Test Method for Rate of Grease Penetration of Flexible Barrier Materials (Rapid Method)《软质密封材料润滑脂渗透率的标准试验方法》.pdf

ASTM F119-1982(2015) Standard Test Method for Rate of Grease Penetration of Flexible Barrier Materials (Rapid Method)《软质密封材料润滑脂渗透率的标准试验方法 (快速法)》.pdf

ASTM F129-1997(2002) Standard Practice for Amount of Ink Deposit on Carbon Paper and Inked Ribbons Other Than Fabric Type《复写纸和油墨色带(不包括织物带)上油墨沉积总量的标准规程》.pdf

ASTM F136-2002a Standard Specification for Wrought Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401)《外科植入设备用锻制钛-6和铝-4.pdf

ASTM F136-2008 Standard Specification for Wrought Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401).pdf

ASTM F136-2008e1 Standard Specification for Wrought Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401)《外科植入设备用锻制钛6和铝4钒.pdf

ASTM F136-2011 Standard Specification for Wrought Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401) 《外科植入设备(UNS R56401).pdf