MSZ 10758-1955 《木制竖罐开瓶器》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN 2854-003-2009 en Aerospace series - Cables electrical for general purpose - Cross sections equal to and greater than 9 mm - Operating temperatures between - 55 Degree C and 260 .pdf

EN 2856-2006 en Aerospace series - Nuts anchor self-locking fixed closed corner reduced series with counterbore - Classification 1 100 MPa 235 《航空航天系列 沉孔缩径闭合角固定自锁地脚螺母 等级-1100 MPa 2.pdf

EN 2858-1-1994 en Titanium and Titanium Alloys Forging Stock and Forgings Technical Specification Part 1 General Requirements《钛和钛合金锻坯和锻件技术规范 第1部分 一般要求》.pdf

EN 2858-2-1994 en Titanium and Titanium Alloys Forging Stock and Forgings Technical Specification Part 2 Forging Stock《钛和钛合金锻坯和锻件技术规范 第2部分 锻坯》.pdf

EN 2858-3-1994 en Titanium and Titanium Alloys Forging Stock and Forgings Technical Specification Part 3 Pre-Production and Production Forgings《钛和钛合金锻坯和锻件技术规范 第3部分 预行生产锻件和生产锻件》.pdf

EN 2859-2006 en Aerospace series - Bolts normal hexagonal head close tolerance normal shank short thread in alloy steel cadmium plated metric series - Classification 1 100 MPa (at .pdf

EN 286-1-1998 en Simple unfired pressure vessels designed to contain air or nitrogen - Part 1 Pressure vessels for general purposes (Incorporating Corrigendum July 2002 Incorporate.pdf

EN 286-2-1992 en Simple Unfired Pressure Vessels Designated to Contain Air or Nitrogen - Part 2 Pressure Vessels for Air Braking and Auxiliary Systems for Motor Vehicles and Their .pdf

EN 286-3-1994 en Simple Unfired Pressure Vessels Designed to Contain Air or Nitrogen - Part 3 Steel Pressure Vessels Designed for Air Braking Equipment and Auxiliary Pneumatic Equi.pdf