MSZ 10813-1953 《管铆钉机械车，和在铆接的离合器矿床》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D5183-2005 Standard Test Method for Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine《用四球磨损试验机测定润滑剂摩擦系数的标准试验方法》.pdf

ASTM D5183-2005(2011) Standard Test Method for Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine《用四球耐磨试验机测定润滑剂磨擦系数的标准试验方法》.pdf

ASTM D5183-2005(2016) Standard Test Method for Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine《使用四球磨损试验机测定润滑油摩擦系数的标准试验方法》.pdf

ASTM D5184-2001(2006) Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing Fusion Inductively Coupled Plasma Atomic Emission Spectrometry and Atom.pdf

ASTM D5184-2012 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing Fusion Inductively Coupled Plasma Atomic Emission Spectrometry and Atomic Abs.pdf

ASTM D5184-2012(2017) Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing Fusion Inductively Coupled Plasma Atomic Emission Spectrometry and Atom.pdf

ASTM D5185-2005 Standard Test Method for Determination of Additive Elements Wear Metals and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oil.pdf

ASTM D5185-2009 Standard Test Method for Determination of Additive Elements Wear Metals and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oil.pdf

ASTM D5185-2013 Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (IC.pdf