MSZ 5111-1961 《钢铁，生铁以及铸铁综合检测 铬含量定义》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

HB 725-1992 加工轻合金镶齿两面.刃和三面刃铣刀用高速钢刀齿.pdf

HB 734-1992 四齿套式扩孔钻用槽铣刀.D=55～85mm.pdf

HB 736-1992 丝锥用槽铣刀.D=65～95mm.pdf

HB 737-1992 加工铝合金下料立铣刀用槽铣刀.D=40mm.pdf

HB 741-1992 四齿套式扩孔钻槽铣刀用样板和校对样板.检测HB 734-92槽铣刀用.pdf

HB 743-1992 丝锥槽铣刀用样板和校对样板.检测HB 736-92槽铣刀用.pdf

HB 744-1992 加工铝合金下料立铣刀槽铣刀用样板和校对样板.检测HB 737-92槽铣刀用.pdf

HB 792-1974 针式双头光面塞规用手柄D=0.1~3mm.pdf

HB 792-1989 双头针式光滑塞规用手柄（D=0.1～3mm）.pdf