MSZ 21431 5 lap-1964 《胶卷的尺寸8毫米胶卷》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSS-M4D585-C1-2017 POLYCARBONATE ACRYLONITRILE BUTADIENE STYRENE BLEND (PC+ABS) HIGH IMPACT MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D595-A2-2015 POLYAMIDE 6 (PA 6) 40% GLASS FIBER REINFORCED MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D627-A2-2010 POLYCARBONATE (PC) MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚碳酸酯(PC)模塑材料 与福特WSS-M99P1111-A 一起使用[使用 福特WSS-M4D1053-A1 福特WSS-M4D1053-A2]》.pdf

FORD WSS-M4D628-A2-2010 POLYAMIDE (PA) 66 MOLDING COMPOUND 25% GLASS SPHERE REINFORCED FIRE RETARDANT INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用25%玻璃珠增强的阻燃聚酰胺66成型料 与标准F.pdf

FORD WSS-M4D631-A2-2008 ABS MOLDING COMPOUND HIGH COLD IMPACT INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《高冷冲击 内部用高冷冲击丙烯腈-丁二烯-苯乙烯模塑料(和FORD WSS-M99P1111-A一起使用)(使用 FORD WSK-M4D82.pdf

FORD WSS-M4D638-B-2015 POLYPROPYLENE (PP) MOLDING COMPOUND MOLDED-IN-COLOR INTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D638-C-2015 POLYPROPYLENE (PP) MOLDING COMPOUND MOLDED-IN-COLOR INTERIOR HIGH IMPACT TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D638-C2-2006 POLYPROPYLENE (PP) MOLDING COMPOUND COLOR PIGMENTED LOW GLOSS UV STABILIZED INTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Use WSS-M4D638-C)《内部染色的低光泽具有紫外线稳.pdf

FORD WSS-M4D638-D2-2013 POLYPROPYLENE (PP) COPOLYMER MOLDING COMPOUND MOLD-IN-COLOR LOW GLOSS UV STABILIZED HIGH IMPACT AT COLD TEMPERATURE INTERIOR TO BE USED WITH FORD WSS-M99P1.pdf