MSZ MI 7979-1976 《针式轴承运转测算》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 50158-2-2008 Metallic materials - Hardness testing with portable measuring instruments operating with electrical penetration depth - Part 2 Verification and calibration of the .pdf

DIN 50159-1-2015 Metallic materials - Hardness testing with the UCI method - Part 1 Test method《金属材料 UCI法的硬度试验 第1部分 试验方法》.pdf

DIN 50159-2-2015 Metallic materials - Hardness testing with the UCI method - Part 2 Verification and calibration of the testing devices《金属材料 UCI法的硬度试验 第2部分 试验装置的检验和校准》.pdf

DIN 5016-1994 Business forms - Delivery schedule《商务表格 交付进度表》.pdf

DIN 50162-1978 Testing of clad steels determination of shear strength between cladding metal and parent metal in shear test《包层钢板的检验 剪切试验中包层金属与母体材料之间的剪切强度的测定》.pdf

DIN 5018-2011 Business forms - Forwarding instruction《商务表格 货物发送细则》.pdf

DIN 50190-3-1979 Hardness depth of heat-treated parts determination of the effective depth of hardening after nitriding《热处理件的硬化深度 氮化处理后硬化有效深度的测定》.pdf

DIN 50190-4-1999 Hardness depth of heat-treated parts - Part 4 Determination of the fusion hardening depth and the fusion depth《热处理零件的硬化深度 第4部分 熔炼硬化深度和熔炼深度的测定》.pdf

DIN 502-2004 Driving Components - Flange bearings - Fastened with two screws《传动元件 用两个螺钉紧固的法兰轴承》.pdf