1、This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2015 by Navistar, Inc. JUNE 2015 Page 1 of 1 NAVISTAR, INC. Material, Parts, and Process Specifications (
2、MPAPS) NUMBER: MPAPS S-EM-0.0 Former Designation: ESP-EM-0.0 TITLE: Table of Contents Section EM Nuts - Metric Series CURRENT REV No.: 1506 DATE: June 2015 WRITTEN/EDITED BY: Materials Engineering APPROVED BY: Materials Engineering SUPERSEDES: ESP-EM-0.0 - January 2001 PRINTED COPIES OF THIS DOCUMEN
3、T MUST BE VERIFIED FOR CURRENT REVISION This specification may involve hazardous materials, equipment, and procedures. This specification does not purport to address all of the safety issues associated with its use. The user is responsible to consult appropriate safety and health practices and to de
4、termine the applicability of regulatory limits prior to use. Change Notice: Changed to New MPAPS format. Hex Nuts Metric Series (Noun Code 5780) MPAPS S-EM-1.101-GS/PL Hex Flange Nuts Metric Series (Noun Code 5780) MPAPS S-EM-3.101-GS/PL Tab Weld Nuts Metric Series (Noun Code 5780) MPAPS S-EM-39.101
5、GS/PL Hex Piloted Projection Weld Nuts Metric Series (Noun Code 5780) MPAPS S-EM-40.101-GS/PL Tapping Bosses - Metric Series MPAPS S-EM-42.101-GS/PL Prevailing Torque Hex Nuts All Metal Metric Series (Noun Code 5780) MPAPS S-EM-56.101-GS/PL Prevailing Torque Hex Flange Nuts All Metal Metric Series (Noun Code 5780) MPAPS S-EM-58.101-GS/PL Multi-Thread Wide Range “U” Nuts Metric Series (Noun Code 5780) MPAPS S-EM-70.101-GS/PL Wing Nuts Metric Series (Noun Code 5780) MPAPS S-EM-74.101-GS/PL
