1、 This document is restricted and may not be sent outside International Truck and Engine Corporation or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. Ge32001 International Truck and Engine Corporation For Further information C
2、ontact: Materials Engineering Truck Development and Technology Center 2911 Meyer Rd., Post Office Box 1109, Ft. Wayne, Indiana 46801-1109 Email: MaterialsEngineeringNav-I. AUGUST 2001 Page 1 of 1 INTERNATIONAL TRUCK AND ENGINE CORPORATION TMS (TRUCK MATERIAL SPECIFICATION) NUMBER: TMS-2006 TITLE: Gr
3、ay Cast Iron, Piston Ring Carrier REVISION: B-1 WRITTEN/EDITED BY: Materials Engineering APPROVED BY: Materials Engineering DATE VOIDED: November 1985 PRINTED COPIES OF THIS DOCUMENT MUST BE VERIFIED FOR CURRENT REVISION This specification may involve hazardous materials, equipment, and procedures.
4、This specification does not purport to address all of the safety issues associated with its use. The user is responsible to consult appropriate safety and health practices and to determine the applicability of regulatory limits prior to use. Change Notice: VOID Reference: File 12-11 Keywords: Gray Iron; Piston Ring Carrier Replaced by EMS E06-5008 For Information on Engine Material Specifications (EMS) Contact: Materials Engineering Engine Division International Truck and Engine Corporation 10400 West North Avenue Melrose Park, IL 60160 V O I D
