1、d- 65- 17 MIL-1-85370 b W 9799906 0323564 W MIL-I 85 3 70 (AS) 3 FEBRUARY 1987 MLLITARY SPECIFICATION IRON OXIDE, (MONOHYDRATE) YELLOW This specification is approved for use witliiii the Nuval Air Systeiiis Coniriiaric and is available for use by all Departments and Agencies of tlie Department of De
2、fense. 1. SCOPE epartineiit of the Navy, 1.1 Scope. This specification covers the manufacture and acceptance of one type of yellow iron oxide (see 6.1). 2. APPLICABLE DOCUMENTS 2.1 Government documents. 2.1.1 Standards. The following standards form a part of this specification to the extent specifie
3、d herein. Unless otherwise specified, the issues of these docutnetits shall be those listed in tlie issue of the Departtnent of Defense Index of Specifications and Standards (DODISS) and supplement thereto, cited in the solicitation. STANDARDS Fcderul FED-STD-3 13 Material Safety Data Sheets; Ircprr
4、raioii und Submission of Military MIL-STD-105 Sanipliiig Procedures and Tables Cor Inspection by Attributes MIL-STD-129 Markiiig for Shipineiit and Storage (Copies of standards required by contractors in connection with specific acquisition functions should be obtained from the contracting activity
5、or as directed by the contracting activity). 2.2 Other publications. The following documents form a part of this specification to the extent specified herein. Unless otherwise specified, the issues of the documents which are DOD adopted shall be those listed in the issue of the DODISS specified in t
6、he solicitation. Unless otherwise specified, the issues of the docu- ments not listed in the DODISS shall be the issue of the nongovernment documents which is currenf on the date of the solicitation. American Society for Testing and Materials D 34 Chemical Analysis of White Pigments D 50 Chemical An
7、alysis of Yellow, Orange, Ked, and Brown Pigments Con- taining Iron and Manganese Beneficial comments (recommendations, additions , deletions) and any pcrtineiit data which may be of use in improving. this docuirient should be addressed 10: Coiiiniandiiig Officer, Naval Air Eiiginecring Cciiter, Sys
8、temsEngineering and Standardization Department (SESD) Code 93, Lakehurst, NJ 08733, by using the self-addressed Standardization Docuiiient Improvement Proposal (LID Forni 1426) appcariiig at the end of FSC 68 10 DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited. AMSC N
9、/A THIS DOCUMENT CONTAINS TPAGES. . Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-D 185 Coarse Particles in Pigments, Pastes and Paints D 200 Hygroscopic Moisture (and Other Matter Volatile Under the Test Conditions) in Pigriieiits D 768 Yellow Iro
10、n Oxide Hydrated (Application for copies should be addressed to the American Sociciy for Testing und Materials, 1916 Race Street, Philadelphia, Pa. 19103.) NATIONAL MOTQR FREtGHT ASSOCIATION, LNC., AGENT National Motor Freight Classification (Application for copies should he addressed to American Tr
11、ucking Associations, Aun: Traffic Department, 1616 P Street, Washington D.C. 20036). UNIFORM CLASSIFICATION COMMITTEE, AGENT Uniform Freight Classificatioii (Application for copies should be addressed to the Uiiiloriii Classicatioti Coiiiniittcc, Room 1 106, 222 Riverside Plaza, Chicago, Illinois 60
12、606.) (Nongovernment standards and other publications are normally available troni the organizations that pre- pure or distribute the documents. These documents also may be available through libraries or other infor- mational services.) 2.3 Order of Precedence. In the event of a contlicl between the
13、 text of this specilkation and the refer- ences cited herein, the text of this specification shall take precedence. Nothing in this spccification, however, . shall supersede applicable laws and rcgulatioiis unless a spccific cxciiiptioii tias becii obiairicd. 3, REQUIREMENTS 3.1 Chemicat and physica
14、l properties, Chemical and physical properties of this inaterial shall be us specified in tabte I. TABLE 1 Chemical and physical properties. Prowriy lroii content, O.o W. as FeicI (.CC 0.2). it 101 1i;iIl coiisisi 01 uII riiatriiul manufactured in one continuous production run or in one batch, under
15、 essentially identical conditions, from the same raw materials, and to be offered for acceptance ut one time. Seveia1 baiclies, manufactured from the same raw materials, may be blended to form a uniforni larger batch which shall then constitute a lot for inspection purposes. 4.3.2 Sampling. Unless o
16、therwise specified, saiiipling and acctptrinct: criteria shall be in accordance with MIL-STD-105, inspection level 1. Tho sample unit shalt be one unit piickgc or coiitainer of material. Each sample shall consist of sufficient material to perform the quality conformance tests as specified in table 1
17、1. 3 l I .I Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Y 5. PACKAGING 5.1 Packaging and packing. Unless otherwise specified in the contract (see 6.2. I), packaging and pack- ing shall be commercial. 5.1.1 Commercial. Unless otherwise specified i
18、n the contract (see 6.2. I), packaging and packing shall be in accordance with standard commercial practice applicable to the type of material, The packaging and packing shall be of such construction aiid materials that t tie cotitctits will be adequatcly protected against loss or contamination. Con
19、tainer size shall be us specified in the contract (see 6.2). Containers shall con- forin to Uniform Freight Classification, National Motor Frcighl Classification ur to riilcs of other carriers applicable to lie niode of rransportaiioii. 5.2 Marking. In addition to any spccial marking rcquircd by the
20、 contract (sec 6.2), each contaiiier shall be marked in accordance with MIL-STD-129. Marking shall include, but not be limited to the following information: . a. Title, number and date of this specification b. Manufacturers naine and location c. Material trade name d. Net weight e. Lot number, batch
21、 number) and date of manufacture i. Storage conditioiis g. Contract number 6. NOTES 6.1 Intended use. The material specified herein is intended for use as a burning rate modifier in compo- site rocket propellants. 6.2 Ordering data. 6.2.1 Acquisition reyuireinenls. Acquisition documents should speci
22、fy the following: a. Title, number and dace of this specification b. Quantity required c. Date and place af delivery d. inspection conditions, if other than as specified (see 4.2) e. Lot size, if other than as specified f. Packaging requirements,. if other than as specified (see 5. I) g. Size of con
23、tainer required h. Any special marking required I 4 i- -. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-(Project 6810-NI3571 MIL-1-85370 b8 W 99999Ob OL235b8 5 W M 1 L-1-85370(AS) 6.3 Possible source of supply. A product that tias inet tlic rccluir
24、cniwts of iliis spcciticritioii iii past procurc- ment is MAPICO 1O00, manufactured by Cities Service Co., Akron, Ohio. This iiifortiiation is for thc coil- venience oftlic procuring activity and is not (o be construcd us il waiver of any requirciiieiil ot this spccificatiaii nor as any limitation o
25、f additional potential sources of supply. 6.4 Material safety data sheets. Contracting officers will identify ihosc activities requiring copies of com- pleted Material Safety Data Sheets prepared in accordance with FED-STD-3 13. The pertinent government mailing addresses for submission of data aie listed in Appendix 13 of FED-STD-313. 6.5 Subject term (key word) listing. Iron oxide Material safety data sheet Preparing activity: Navy -AS - 5 U.8. eOVERNMEMT ?RXMtXW #CtCRI 1-7 - 704-0sL/7OIol Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
