1、MIL-I-8974AAMENDMENT 202 April 2001SUPERSEDINGAMENDMENT 102 May 1988MILITARY SPECIFICATIONINDICATOR, EVENT COUNTING, GENERAL SPECIFICATION FORThis amendment forms a part of MIL-I-8974A, dated 15 July 1981, and is approved foruse by all Departments and Agencies of the Department of Defense.PAGE 1Dele
2、te 2.1 and substitute with the following paragraphs:“2.1 Government documents .2.1.1 Specifications and standards . The following specifications and standards form a partof this specification to the extent specified herein. Unless otherwise specified, the issues of thesedocuments shall be those list
3、ed in the issue of the Department of Defense Index of Specificationsand Standards ( DoDISS) and supplement thereto, cited in the solicitation.”At the bottom of page to the left of “FSC 6620” add the following:“AMSC N/ADISTRIBUTION STATEMENT A . Approved for public release; distribution is unlimited.
4、”PAGE 2Under SPECIFICATIONS, MILITARY delete the following:“MIL-I-8 974/1 Indicator, Events, Miniature, Digital, 28 VDC”AMSC N/A 1 of 4 FSC 6620DISTRIBUTION STATEMENT A . Approved for public release; distribution is unlimited .INACTIVE FOR NEW DESIGN AFTER 30 AUGUST 1999INCH-POUNDProvided by IHSNot
5、for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-I-8974AAMENDMENT 22Directly above 3. REQUIREMENTS, add the following:“2.3 Order of precedence . In the event of a conflict between the text of this specificationand the references cited herein (except for MS standards
6、 and specification sheets), the text of thisspecification shall take precedence. Nothing in this specification, however, shall supersedeapplicable laws and regulations unless a specific exemption has been obtained.”* 3.2: Delete and substitute:“3.2 First article . When specified (see 6.2), a sample
7、shall be subjected to first articleinspection in accordance with 4.3.”PAGE 5Delete 3 .8.3 and substitute the following:“3.8.3 Filling medium . The filling medium shall be of at least 98 percent purity and free ofdust particles. The filling medium may not contain more than .006 milligram of water vap
8、or (dewpoint 65 C or 85 F maximum) at the filling pressure. The filling medium shall consist of 100percent helium (preferred), a mixture of 88 to 92 percent nitrogen and the remainder helium, or amixture of inert noble gases (such as argon and helium). The absolute pressure of the fillingmedium in t
9、he case shall be a minimum of one atmosphere.”PAGE 8Delete 4.1 and substitute with the following two paragraphs:“4.1 Responsibility for inspection . Unless otherwise specified in the contract or purchaseorder, the contractor is responsible for the performance of all inspection requirements as specif
10、iedherein. Except as otherwise specified in the contract or purchase order, the contractor may usehis or any other facilities suitable for performance of the inspection or requirements specifiedherein, unless disapproved by the Government. The Government reserves the right to performany of the inspe
11、ctions set forth in the specification where such inspections are deemed necessaryto assure supplies and services conform to prescribed requirements.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-I-8974AAMENDMENT 234.1.1 Responsibility for compli
12、ance . All items must meet all requirements of sections 3and 5. The inspection set forth in this specification shall become a part of the contractors overallinspection system or quality program. The absence of any inspection requirements in thespecification shall not relieve the contractor of the re
13、sponsibility of assuring all products orsupplies submitted to the Government for acceptance comply with all requirements of thecontract. Sampling in quality conformance does not authorize submission of known defectivematerial, either indicated or actual, nor does it commit the Government to acceptan
14、ce of defectivematerial.”* 4.2a: Delete and substitute:“a. First article inspection (see 4.3).”* 4.3: Delete and substitute:“First Article”* 4.3.1: Change “Qualification” to “First Article” four places.* 4.3.2: Change “Qualification” to “First Article” four places.* 4.3.3: Delete.PAGE 9* Table I: De
15、lete “Qualification” and subs titute “First article” in title.PAGE 14Change “5. PRESERVATION PACKAGING” to “5. PACKAGING.”Change “5.1 Preservation, - packaging ” to “5.1 Preservation ”.PAGE 15Change “6.2 Ordering data . Procurement documents should specify the following:” to thefollowing two paragra
16、phs:“6.2 Ordering data .Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-I-8974AAMENDMENT 246.2.1 Acquisition requirements . Procurement documents should specify the following:”* 6.2.1: Add as 6.2.1(f):“(f) When first article is required (see 3.2)
17、.”* 6.4: Delete.PAGE 166.7: Add the following:“6.7 Subject term (key word listing .Indicator, event countingInstrument”NOTE: The margins of this amendment are marked with asterisks to indicate where changes fromthe previous amendment were made. This was done as a convenience only and the Governmenta
18、ssumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractorsare cautioned to evaluate the requirements of this document based on the entire contentirrespective of the marginal notations and relationship to the last previous amendment.Custodians: Preparing activity:Navy - AS Navy - ASAir Force - 99(Project 6620 - 0727)Review activities:Navy - SHAir Force - 71Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
