1、00-D-3388B (3) 73 m 9999974 0083250 5TB m 00-D-1388B AMENDMENT 1 Jlv 14, 1992 FEDERAL SPECIFICATION DISHWASHING MACHINES, COMMERCIAL (RACKLESS CONVEYOR) This amendment which forms a part of 00-D-l388B, dated May 21, 1984, is approved by the Commissioner, Federal Supply Service, General Services Admi
2、nistration, for the use of all Federal agencies. PAGE 11 3.9.8: Delete in entirety and substitute: “3.9.8 an inclined position and to permit use of standard dishwashing racks, when desired, for cups, glasses, silverware cylinders and other small items. The maximum conveyor speed shall be as specifie
3、d in table II. shall be in accordance with 1.2 and 3.1. essentially of rods, rollers, side links, and dish-supporting peg links. Peg Links shall be equipped at regular intervals with corrosion-resistant steel outer brackets to support standard, fully-loaded dishwashing racks. Peg links shall be form
4、ed of corrosion-resistant steel wire and the tips of the peg links shall have protective plastic covers. corrosion-resistant steel or nonferrous nickel alloy. contact with dishware shall be plastic-coated or encased in plastic sleeves to prevent chipping of tableware. The conveyor support frame shal
5、l be fabricated of corrosion-resistant steel of a thickness not less than 11 gauge. mechanical or hydraulic speed-reducing unit by a separate motor rated not less than 1/2 horsepower (hp). Mechanical or electrical means shall be provided for automatic release or disconnection of the drive or the dri
6、ving motor when the conveyor driving torque exceeds a preset limit as a result of jamming. This feature shall be supplementary to the stop bar specified in 3.9.3 for the unloading section. Shear pins or other mechanisms requiring replacement of any part WU not be acceptable as an emergency means for
7、 disconnecting the drive. Convevor. Conveyors shall be designed to hold dishes and trays in Conveyor width The conveyors shall consist a The rods and side links shall be Rods normally in Rollers shall be corrosion-resistant steel. Conveyors shall be driven through a AMSC N/A FSC 7320 DISTRIBUTION ST
8、ATEMENT A. Approved for public release; distibution is unlimited Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-00-D-13888 (1) 73 9999974 008L251 434 00-D-1388B AMENDMENT 1 PAGE 11 (cond) Exposed gears and sprockets inside the hood and loading secti
9、on of the machine shall be corrosion-resistant metal. other components of the conveyor drive system shall be guarded from contact by operating personnel by the sheet metal panels of the machine enclosure. Conveyors shall in other respects meet the requirements of NSF 5. A gears, sprockets, chains, b
10、elts and No. 3 and No. MILITARY INTEREST: Custodians Army - GL Navy - YD Air Force - 99 Review Activities Army - TS, MD Navy - SA, MS Air Force - 84 User Activities CIVIL AGENCY COORDINATING ACTMTIES: GSA - FSS NA - OSS HHS - FDA PREPARING ACTIVITY: Navy - SA DoD Project 7320-0883 Army - CE Navy - CG, MC 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
