NBN C 63-269 FASC 4-DELL 4-1977 3125 《低压熔丝断路器 第4部分：用于半导体装置保护的替换元件的补充条款 n n》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 15502-1991 Curcular all-cast moulding boxes of aluminium and magnesium alloys having inside diameter 600 mm height from 125 to 200 mm Construction《净尺寸为直径600mm,高度为125~200mm,的铝合.pdf

GOST 15503-1991 Circular all-cast moulding boxes of aluminium and magnesium alloys having inside diameter 600 mm height 250 300 mm Construction《净尺寸为直径600mm，高度为250～300mm，的铝合金及镁合金的圆形.pdf

GOST 15504-1991 Circular all-cast moulding boxes of aluminium and magnesium alloys having inside diameter 750 mm height 150 200 mm Construction《净尺寸为直径750mm，高度为150～200mm，的铝合金及镁合金的圆形.pdf

GOST 15505-1991 Circular all-cast moulding boxes of aluminium and magnesium alloys having inside diameter 750 mm height 250 300 mm Construction《净尺寸为直径750mm，高度为250～300mm，的铝合金及镁合金的圆形.pdf

GOST 15506-1991 All-cast moulding boxes of aluminium and magnesium alloys Technical requirements《铝合金及镁合金整铸的铸造型箱 技术要求》.pdf

GOST 1551-1993 Sun or artificial-dried fish Specifications《晒干鱼 技术条件》.pdf

GOST 15510-1970 Removable nut stops with joint pin for boring bars and boring arbors Design《钻杆和钻轴用带连接销的移动式防松螺母 设计》.pdf

GOST 15511-1970 Back nuts for boring bars and boring arbors Design《钻杆和钻轴用支承螺母 设计》.pdf

GOST 15512-1970 Stop washer with inner joggle for boring bars Design《镗杆用带内凸缘止动垫圈 结构》.pdf