NBN EN ISO 3613-1995 0625 Chromate conversion coatings on zinc and cadmium - Test methods (ISO 3613 1980)《锌，镉，铬酸盐转化镀层 试验方法（ISO 3613-1980）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

JUS M G4 111-1978 Driving keys for milling machine spin le noses with 7 24 taper《锥度为7 24的铣床轴头主轴端传动键》.pdf

JUS M G5 010-1989 Machine tools Testing of accuracy Boring and miiling machines Planer type machines with movable column《机械工具 精度测试 钻磨机械 带移动柱的刨床》.pdf

JUS M G5 011-1991 Machine tools Testing of accuracy Boring and milling machines Table type machines《机械工具 精度测试 钻磨机械 台式机械》.pdf

JUS M G5 012-1994 Machine tools - Boring and milling machines - Conditions of acceptance and installation for work-holding fixed tables of machine tools《机床-钻磨机械-机床夹具固定工作台验收与安装条件》.pdf

JUS M J1 100-1978 Raise Climber Main dimensions《上升梯 主要尺寸》.pdf

JUS M J1 132-1993 Heading machines for mining workings - Side tip loader - Basic measures and technical requirements《采掘用掘进机 侧卸式装载机 基本措施与技术要求》.pdf

JUS M J2 102-1989 Rotary drilling eguipment Upper and lower kelly cocks《旋转钻孔设备 高低方钻杆旋塞》.pdf

JUS M J2 103-1988 Materials and equipment for petroleum and natura gas industries Steef dri f pipe for oil or natura gas we ls《石油天然气工业材料及设备 油气井钢制钻杆》.pdf

JUS M J2 104-1989 Materials and equipment for petroleum and natural gas industries Tool joints for steel drill pipe for oil or natural gas wells《石油天然气工业材料及设备 油气井钢制管道工具连接》.pdf