NC 00-40-1985 National System for Standardizaron Metrology and Quality Control Guide for Drawing-Up of Verification Methods and Means Standards《国家标准化，度量和质量控制系统，检验方法和标准手段制订指南》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

HB 4168-1988 加工轻合金不通孔普通螺纹带后引导的短柄机、手用丝锥 d＝6~11mm.pdf

HB 4169-1988 加工轻合金不通孔普通螺纹带后引导的短柄机、手用丝锥 d＝12~36mm.pdf

HB 4170-1988 加工轻合金不通孔普通螺纹带后引导的长柄机、手用丝锥 d＝3~3．5mm.pdf

HB 4171-1988 加工轻合金不通孔普通螺纹带后引导的长柄机、手用丝锥 d＝4~5mm.pdf

HB 4172-1988 加工轻合金不通孔普通螺纹带后引导的长柄机、手用丝锥 d＝6~11mm.pdf

HB 4173-1988 加工轻合金不通孔普通螺纹带后引导的长柄机、手用丝锥 d＝12~36mm.pdf

HB 4174-1988 加工轻合金通孔普通螺纹带后引导的短柄机、手用丝锥 d＝3~3．5mm.pdf

HB 4175-1988 加工轻合金通孔普通螺纹带后引导的短柄机、手用丝锥 d＝4~5mm.pdf

HB 4176-1988 加工轻合金通孔普通螺纹带后引导的短柄机、手用丝锥 d＝6~11mm.pdf