1、NEMA Standards PublicationNational Electrical Manufacturers AssociationSupplement to ANSI/NEMA MW 1000 (Incorporates Errata: 10/01/2015)Reference Requirements for Round Film-insulated Magnet WireSupplement to ANSI/NEMA MW 1000 Reference Requirements for Round Film-insulated Magnet Wire Published by:
2、 National Electrical Manufacturers Association 1300 North 17thStreet, Suite 900 Rosslyn, Virginia 22209 www.nema.org 2015 National Electrical Manufacturers Association. All rights, including translation into other languages, reserved under the Universal Copyright Convention, the Berne Convention or
3、the Protection of Literary and Artistic Works, and the International and Pan American copyright conventions. 2015 National Electrical Manufacturers Association NOTICE AND DISCLAIMER The information in this publication was considered technically sound by the consensus of persons engaged in the develo
4、pment and approval of the document at the time it was developed. Consensus does not necessarily mean that there is unanimous agreement among every person participating in the development of this document. The National Electrical Manufacturers Association (NEMA) standards and guideline publications,
5、of which the document contained herein is one, are developed through a voluntary consensus standards development process. This process brings together volunteers and/or seeks out the views of persons who have an interest in the topic covered by this publication. While NEMA administers the process an
6、d establishes rules to promote fairness in the development of consensus, it does not write the document and it does not independently test, evaluate, or verify the accuracy or completeness of any information or the soundness of any judgments contained in its standards and guideline publications. NEM
7、A disclaims liability for any personal injury, property, or other damages of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use of, application, or reliance on this document. NEMA disclaims and makes no guarant
8、y or warranty, expressed or implied, as to the accuracy or completeness of any information published herein, and disclaims and makes no warranty that the information in this document will fulfill any of your particular purposes or needs. NEMA does not undertake to guarantee the performance of any in
9、dividual manufacturer or sellers products or services by virtue of this standard or guide. In publishing and making this document available, NEMA is not undertaking to render professional or other services for or on behalf of any person or entity, nor is NEMA undertaking to perform any duty owed by
10、any person or entity to someone else. Anyone using this document should rely on his or her own independent judgment or, as appropriate, seek the advice of a competent professional in determining the exercise of reasonable care in any given circumstances. Information and other standards on the topic
11、covered by this publication may be available from other sources, which the user may wish to consult for additional views or information not covered by this publication. NEMA has no power, nor does it undertake to police or enforce compliance with the contents of this document. NEMA does not certify,
12、 test, or inspect products, designs, or installations for safety or health purposes. Any certification or other statement of compliance with any health- or safety-related information in this document shall not be attributable to NEMA and is solely the responsibility of the certifier or maker of the
13、statement. ANSI/NEMA MW 1000 Supplement Page i 2015 National Electrical Manufacturers Association Foreword The purpose of this standards publication is to present, in concise and convenient form, all dimensional and performance requirements for round film-insulated magnet wire constructions included
14、 in ANSI/NEMA MW 1000 in the form of master requirement tables grouped according to conductor material and insulation build. This standard is reviewed periodically by the Magnet Wire Section of NEMA so that it will be kept up-to-date with evolving technology. Comments are welcome and should be sent
15、to: Senior Technical Director, Operations National Electrical Manufacturers Association 1300 North 17thStreet, Suite 900 Rosslyn, Virginia 22209 This standard was developed by the Magnet Wire Section of NEMA. At the time it was approved, the Magnet Wire Section had the following members: Alconex Spe
16、cialty Products, Inc. Fort Wayne, IN Bridgeport Insulated Wire Company Bridgeport, CT CONDUMEX Mxico, D.F. Elektrisola, Inc. Boscawen, NH Essex Group, Inc. Fort Wayne, IN Magnekn San Nicolas, NL, Mexico MWS Wire Industries Westlake Village, CA Rea Magnet Wire Company, Inc. Fort Wayne, IN ANSI/NEMA M
17、W 1000 Supplement Page ii 2015 National Electrical Manufacturers Association CONTENTS Foreword i Section 1 GENERAL . 1 1.1 Scope . 1 1.2 Normative References . 1 Section 2 MASTER REQUIREMENT TABLES. 2 2.1 General 2 2.2 Single Build Film-insulated Round Copper Magnet Wire 2 2.3 Single Build Film-insu
18、lated Round Aluminum Magnet Wire 2 2.4 Heavy Build Film-insulated Round Copper Magnet Wire 2 2.5 Heavy Build Film-insulated Round Aluminum Magnet Wire 2 2.6 Triple Build Film-insulated Round Copper Magnet Wire . 2 2.7 Quad Build Film-insulated Round Copper Magnet Wire 2 Tables Table 1 (inch) Dimensi
19、ons and Properties for Single Build Film-insulated Round Copper Magnet Wire 3 Table 1 (mm) Dimensions and Properties for Single Build Film-insulated Round Copper Magnet Wire 5 Table 2 (inch) Dimensions and Properties for Single Build Film-insulated Round Aluminum Magnet Wire 7 Table 2 (mm) Dimension
20、s and Properties for Single Build Film-insulated Round Aluminum Magnet Wire 8 Table 3 (inch) Dimensions and Properties for Heavy Build Film-insulated Round Copper Magnet Wire 9 Table 3 (mm) Dimensions and Properties for Heavy Build Film-insulated Round Copper Magnet Wire 12 Table 4 (inch) Dimensions
21、 and Properties for Heavy Build Film-insulated Round Aluminum Magnet Wire 15 Table 4 (mm) Dimensions and Properties for Heavy Build Film-insulated Round Aluminum Magnet Wire 17 Table 5 (inch) Dimensions and Properties for Triple Build Film-insulated Round Copper Magnet Wire 19 Table 5 (mm) Dimension
22、s and Properties for Triple Build Film-insulated Round Copper Magnet Wire . 21 Table 6 (inch) Dimensions and Properties for Quad Build Film-insulated Round Copper Magnet Wire . 23 Table 6 (mm) Dimensions and Properties for Quad Build Film-insulated Round Copper Magnet Wire . 25 ANSI/NEMA MW 1000 Sup
23、plement Page 1 2015 National Electrical Manufacturers Association Section 1 GENERAL 1.1 SCOPE This standards publication covers requirements for all constructions of round film-insulated magnet wire given in ANSI/NEMA MW 1000, Part 2. Excluded from this standards publication are requirements for ful
24、ly insulated winding wire (FIW), fibrous-covered round magnet wire and rectangular and square magnet wire. 1.2 NORMATIVE REFERENCES The following publications are adopted in part, by reference in this publication, and are available from the organization below. Unless otherwise noted, references are
25、to the most recent edition. National Electrical Manufacturers Association 1300 North 17thStreet, Suite 900 Rosslyn, Virginia 22209 ANSI/NEMA MW 1000 Magnet Wire ANSI/NEMA MW 1000 Supplement Page 2 2015 National Electrical Manufacturers Association Section 2 MASTER REQUIREMENT TABLES 2.1 GENERAL Tabl
26、es 1 through 6 provide dimensional, electrical, and selected mechanical requirements for round film-insulated magnet wire. The information in these tables is taken directly from, and normatively references, requirements found in ANSI/NEMA MW 1000, parts 2 and 3. In case of discrepancies, the require
27、ments in ANSI/NEMA MW 1000 shall prevail. 2.2 SINGLE BUILD FILM-INSULATED ROUND COPPER MAGNET WIRE The requirements in Table 1 apply to specifications for film-insulated round copper magnet wire in ANSI/NEMA MW 1000, Part 2, that include “Single” build dimensional requirements. 2.3 SINGLE BUILD FILM
28、-INSULATED ROUND ALUMINUM MAGNET WIRE The requirements in Table 2 apply to specifications for film-insulated round aluminum magnet wire in ANSI/NEMA MW 1000, Part 2, that include “Single” build dimensional requirements. 2.4 HEAVY BUILD FILM-INSULATED ROUND COPPER MAGNET WIRE The requirements in Tabl
29、e 3 apply to specifications for film-insulated round copper magnet wire in ANSI/NEMA MW 1000, Part 2, that include “Heavy” build dimensional requirements. 2.5 HEAVY BUILD FILM-INSULATED ROUND ALUMINUM MAGNET WIRE The requirements in Table 4 apply to specifications for film-insulated round aluminum m
30、agnet wire in ANSI/NEMA MW 1000, Part 2, that include “Heavy” build dimensional requirements. 2.6 TRIPLE BUILD FILM-INSULATED ROUND COPPER MAGNET WIRE The requirements in Table 5 apply to specifications for film-insulated round copper magnet wire in ANSI/NEMA MW 1000, Part 2, that include “Triple” b
31、uild dimensional requirements. 2.7 QUAD BUILD FILM-INSULATED ROUND COPPER MAGNET WIRE The requirements in Table 6 apply to specifications for film-insulated round copper magnet wire in ANSI/NEMA MW 1000, Part 2, that include “Quad” build dimensional requirements. ANSI/NEMAMW1000 SupplementPage 32015
32、 NationalElectricalManufacturersAssociationTable 1(inch)Dimensions andPropertiesfor SingleBuildFilm-insulatedRoundCopperMagnet Wire*AWG SizeBare Wire ODResistance (perFoot)Ohms perFoot20Cat100%IACSMin Build Max ODDielectric BreakdownVoltage(V)ElongationSpringbackScrape Resistance*Scrape Resistance*M
33、inNomMaxMinNomMaxStandardPolyamideTopcoatAverageSingleAverageSingle80.12720.12850.1294-0.00170.13141870-365-8.50.12010.12130.1221-0.00170.12411870-365-90.11330.11440.1153-0.00170.11731870-365-9.50.10690.10800.1088-0.00170.11091870-355-100.10090.10190.1027-0.00170.10473740-355840715-10.50.09520.09620
34、.0971-0.00170.09903740-355840715-110.08980.09070.0916-0.00170.09343740-355840715-11.50.08470.08560.0864-0.00160.08823520-345840715-120.08000.08080.0814-0.00160.08333520-345840715-12.50.07550.07630.0770-0.00160.07883520-345840715-130.07130.07200.0727-0.00160.07453520-345840715-13.50.06720.06790.0685-
35、0.00160.07033520-335840715-140.06350.06410.0647-0.00160.066635203170334284071574063014.50.05990.06050.0611-0.00160.0629347031303344810690710605150.05650.05710.0577-0.00150.059434303090334678066568558515.50.05340.05390.0544-0.00150.0563338030503348755645665565160.05030.05080.0513-0.00140.053133403010
36、335073562564555016.50.04750.04800.0485-0.00140.0502330029703252710605625530170.04480.04530.0458-0.00140.047532502930325469058560551517.50.04230.04270.0431-0.00130.0449321028903256665565585500180.03990.04030.0407-0.00130.042431702850325864555057048518.50.03760.03800.0384-0.00130.040031302820316062053
37、0550465190.03550.03590.0363-0.00120.037930902780316260051053045019.50.03360.03390.0342-0.00120.0359305027403064580490510435200.03170.03200.0323-0.00120.034030102710306656047549542020.50.02990.03020.0305-0.00110.0321297026703051540460475405210.02820.02850.0288-0.00110.030329302640305352544546039021.5
38、0.02660.02690.0272-0.00110.0287289026002956505430445375220.02500.02530.0256-0.00110.027028502570295849041543036522.50.02370.02390.0241-0.00100.0257282025402960475400415355230.02240.02260.0228-0.00100.024327802500296246039040534523.50.02110.02130.0215-0.00100.0230274024702865445375390330240.01990.020
39、10.0203-0.00100.021727102440286743036538032024.50.01880.01900.0192-0.00090.0206267024102870415350365310250.01770.01790.0181-0.00090.019426402370287240034035030025.50.01670.01690.0171-0.00090.0184260023402774390330340290260.01570.01590.0161-0.00090.017325702310277638032533528526.50.01490.01500.0152-0
40、.00080.0165254022802748365310320275ANSI/NEMAMW1000 SupplementPage 4 2015 NationalElectricalManufacturersAssociationTable 1 (inch) ContinuedDimensions andPropertiesforSingleBuildFilm-insulatedRoundCopperMagnet Wire*AWGSizeBare Wire ODResistance (perFoot)Ohms perFoot20Cat100%IACSMin Build Max ODDielec
41、tric BreakdownVoltage(V)ElongationSpringbackScrape Resistance*Scrape Resistance*MinNomMaxMinNomMaxStandardPolyamideTopcoatAverageSingleAverageSingle270.01410.01420.0143-0.00080.015625002250275035530031026527.50.01330.01340.0135-0.00080.0148247022202653345290300255280.01250.01260.0127-0.00080.0140244
42、02200265533528529525028.50.01180.01190.0120-0.00080.0132241021702658320275285240290.01120.01130.0114-0.00070.012623802140266131026527523529.50.01050.01060.0107-0.00070.0118238021402564300255265225300.00990.01000.0101-0.00070.0112238021402566295250260220310.00880.00890.0090-0.00060.01002040184024-320
43、.00790.00800.0081-0.00060.00912040184024-330.00700.00710.0072-0.00050.00811700153023-340.00620.00630.0064-0.00050.00721700153022-350.00550.00560.0057-0.00040.00641360122021-360.00490.00500.0051-0.00040.00581360122020-370.00440.00450.0046-0.00040.00531360122020-380.00390.00400.0041-0.00030.0047500450
44、19-390.00340.00350.0036-0.00030.004150045018-400.00300.00310.0032-0.00030.003742537517-410.00270.00280.0029-0.00030.003442537517-420.00240.00250.0026-0.00020.003037535016-430.00210.00220.0023-0.00020.002632530015-440.00190.00200.0021-0.00020.002430027514-45-0.00176-3.0803.3483.6160.00020.00222752501
45、1-46-0.00157-3.8704.2074.5440.00020.002025022510-47-0.00140-4.8685.2915.7140.00010.00172252008-48-0.00124-6.2056.7457.2850.00010.00151901708-49-0.00111-7.7448.4179.0900.00010.00131701507-50-0.00099-9.73410.5811.430.00010.00121501307-51-0.00088-12.3213.3914.460.00010.00111301106-52-0.00078-15.6917.05
46、18.410.00010.00101201006-53-0.00070-19.4821.1722.860.000050.000851101005-54-0.00062-24.8226.9829.140.000050.0007510090-55-0.00055-31.5434.2837.020.000050.0007010090-56-0.00049-39.7343.1946.640.000050.000659080-*See Table ofContentsfora listofMWspecification numbersforthese constructions.*MW5,15,24,2
47、8,30,35,72,73,74,76,80,81,83;for MW16-C,see Part3,Table 54.* MW26,27,75,77,78,79,82ANSI/NEMAMW1000 SupplementPage 5 2015 NationalElectricalManufacturersAssociationTable 1 (mm)DimensionsandPropertiesforSingleBuildFilm-insulatedRoundCopperMagnet Wire*AWGSizeBare Wire ODResistance (perFoot)Ohms perFoot
48、20Cat100%IACSMin Build Max ODDielectric BreakdownVoltage(V)ElongationSpringbackScrape Resistance*Scrape Resistance*MinNomMaxMinNomMaxStandardPolyamideTopcoatAverageSingleAverageSingle83.2313.2643.287-0.0433.3381870-365-8.53.0513.0813.101-0.0433.1531870-365-92.8782.9062.929-0.0432.9801870-365-9.52.7152.7432.764-0.0432.8161870-355-102.5632.5882.609-0.0432.6603740-355840715-10.52.4182.4432.466-0.0432.5143740-355840715-112.2812.3042.327-0.0432.3733740-355840715-11.52.1512.1742.195-0.0412.2403520-345840715-122.0322.0522.073-0.0412.1173520-345840715-12.51.9181.9381.956-
