NF C93-910-23-2005 Fibre optic connector interfaces - Part 23 type LX 5 connector family 《光纤连接器接口 第23部分 LX 5型连接头系列》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

KS B ISO 5692-2-2002 Agricultural vehicles－Mechanical connections on towed vehicles－Part 2：Coupling ring 40 with socket《农用车辆 拖挂车辆的机械连接装置 第2部分 带40mm座孔的连接环》.pdf

KS B ISO 5743-2002 Pliers and nippers－General technical requiements《夹扭钳和剪扭钳 一般技术要求》.pdf

KS B ISO 5744-2002 Pliers and nippers－Methods of test《夹扭钳和剪扭钳 试验方法》.pdf

KS B ISO 5745-2002 Pliers and nippers－Pliers for gripping and manipulating－Dimensions and test values《夹扭钳和剪扭钳 夹紧和操作用夹扭钳 尺寸与试验值 》.pdf

KS B ISO 5746-2002 Pliers and nippers－Engineer-s and lineman-s pliers－Dimensions and test values《夹扭钳和剪扭钳 工程技术人员和线路工人用夹扭钳 尺寸和试验值》.pdf

KS B ISO 5747-2002 Pliers and nippers－Lever assisted side cutting pliers end and diagonal cutting nippers－Dimensions and test values《夹扭钳和剪扭钳 杠杆辅助的侧剪切钳、端剪切钳和钭口钳 定义和试验值》.pdf

KS B ISO 5749-2002 Pliers and nippers－Diagonal cutting nippers－Dimensions and test values《夹扭钳和剪扭钳 斜剪钳 尺寸和试验值》.pdf

KS B ISO 5752-2005 Metal valves for use in flanged pipe systems－Face-to-face and centre-to-face dimensions《法兰连接的管道系统用金属法兰 结构长度和端面至中心的尺寸》.pdf

KS B ISO 5753-2008 Rolling bearings－Radial internal clearance《滚动轴承 径向内间隙》.pdf