NF E58-200-1996 Piling equipment Safety requirements 《打桩设备 安全要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AECMA PREN 2204-1998 Heat Resisting Nickel Base Alloy NI-C105-HT Solution Treated and Precipitation Treated Precision Castings Aerospace Series Edition 2 [Refer To ASD-STAN PREN 22.pdf

AECMA PREN 2205-1977 Steel FE-PL43 S 900 MPa Less Than or Equal to Rm Less Than or Equal to 1100 MPa Bars De Less Than or Equal to 40 mm Aerospace Series Edition 1《航空航天系列.900MPa小于或.pdf

AECMA PREN 2206-1977 Steel FE-PL43 S 650 MPa Less Than or Equal to Rm Less Than or Equal to 850 MPa Bars De Less Than or Equal to 150 mm Aerospace Series Edition 1《航空航天系列.650MPa小于或.pdf

AECMA PREN 2207-1977 Steel FE-PL43 S 900 MPa Less Than or Equal to Rm Less Than or Equal to 1100 MPa Hand And Die Forgings De Less Than or Equal to 40 mm Aerospace Series Edition 1.pdf

AECMA PREN 2208-1977 Steel FE-PL43 S 650 MPa Less Than or Equal to Rm Less Than or Equal to 850 MPa Hand And Die Forgings De Less Than or Equal to 150 mm Aerospace Series Edition 1.pdf

AECMA PREN 2209-1977 Steel FE-PL43 S 900 MPa Less Than or Equal to Rm Less Than or Equal to 1100 MPa Sheets Strips and Plates 0.5 mm Less Than or Equal to a Less Than or Equal to 2.pdf

AECMA PREN 2210-1977 Steel FE-PL43 S 650 MPa Less Than or Equal to Rm Less Than or Equal to 850 MPa Tubes for Structures 0.5 mm Less Than or Equal to a Less Than or Equal to 12 mm E.pdf

AECMA PREN 2211-1977 Steel FE-PL43 S 900 MPa Less Than or Equal to Rm Less Than or Equal to 1100 MPa Tubes for Structures 2 mm Less Than or Equal to a Less Than or Equal to 12 mm dd.pdf

AECMA PREN 2212-1977 Steel FE-PL43 S 670 MPa Less Than or Equal to Rm Less Than or Equal to 870 MPa Sheets Strips and Plates 0.5 mm Less Than or Equal to a Less Than or Equal to 20.pdf