NF R42-608-1992 Caravans and light trailers Trailers of categorie 01 and 02 with overrun brakes Inertia bench test methods for brakes 《旅居车和轻型挂车 装有超速制动器的 01 和 02 类挂车 制动器用惯性试验台的试验方法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSS-M3D188-A-2011 UNSATURATED POLYESTER (UP) LOW DENSITY NON-CLASS ----A---- 40% GLASS FIBER REINFORCED SHEET MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《不饱和聚酯(UP).pdf

FORD WSS-M3D188-A-2016 UNSATURATED POLYESTER (UP) LOW DENSITY NON-CLASS -A- 40% GLASS FIBER REINFORCED SHEET MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M3D188-B1-2016 UNSATURATED POLYESTER (UP) LOW DENSITY CLASS -A- 40% GLASS FIBER REINFORCED SHEET MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M3D188-B1-2018 UNSATURATED POLYESTER (UP) LOW DENSITY CLASS -A- 40% GLASS FIBER REINFORCED SHEET MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M3G168-B-2006 TAPE ACRYLIC FOAM PRESSURE SENSITIVE ADHESIVE ONE SIDE HEAT BONDABLE ADHESIVE ONE SIDE TO BE USED WITH FORD WSS-M99P1111-A 《单面涂布热粘式胶粘剂的压敏丙烯酸酯泡沫胶带 与标准FORD .pdf

FORD WSS-M3G176-A2-2012 TAPE ACETATE CLOTH PRESSURE SENSITIVE THERMOSETTING EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M3G177-B-2006 TAPE CLOTH BACKED FLAME RETARDANT POLYMERIC COATED WIRING ASSEMBLIES TO BE USED WITH FORD WSS-M99P1111-A 《布线配件用聚合物涂覆的布衬阻燃胶带 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSS-M3G201-A2-2012 TAPE ADHESIVE ONE SIDED PU FOAM PRESSURE SENSITIVE EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M3G228-A-2012 TAPE POLYESTER TWO SIDED PRESSURE SENSITIVE GENERAL PURPOSE TO BE USED WITH FORD WSS-M99P1111-A .pdf