NF T54-921-1997 Plastics piping systems Thermoplastics valves Test method for the integrity of a valve after temperature cycling under bending 《塑料管道系统 热塑性塑料阀门 受弯曲作用的温度周期变化后阀门完好性的试验.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD ESA-M4D200-B-2010 POLYURETHANE (PUR) FOAM FLEXIBLE RESTRICTED FLOW TO BE USED WITH FORD WSS-M99P1111-A 《柔性限流聚氨酯（PUR）泡沫 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESA-M4D202-A-2006 POLYPROPYLENE FLAME RETARDANT TO BE USED WITH FORD WSS-M99P1111-A 《阻燃型聚丙烯（PP） 与标准FORD WSS-M99P1111-A一起使用 使用WSS-M4D638-B》.pdf

FORD ESA-M4D267-A-2006 NYLON (TYPE 6 6) MODIFIED - HEAT STABILIZED TO BE USED WITH FORD WSS-M99P1111-A 《受热稳定的改性尼龙（型号6 6 ） 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESA-M4D281-A-2006 POLYPROPYLENE GENERAL PURPOSE - EXTRUSION GRADE TO BE USED WITH FORD WSS-M99P1111-A 《挤塑级通用聚丙烯（PP） 与标准FORD WSS-M99P1111-A一起使用 使用ESB-M4D308-A》.pdf

FORD ESA-M4D292-A-2009 TUBING POLYVINYL CHLORIDE - VACUUM LINE TO BE USED WITH FORD WSS-M99P1111-A 《真空管路用聚氯乙烯管件 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESA-M4D293-A-2005 POLYPROPYLENE 20% TALC FILLED TO BE USED WITH FORD WSS-M99P1111-A 《20%滑石粉填充的聚丙烯（PP） 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESA-M4D293-A-2016 POLYPROPYLENE 20% TALC FILLED TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD ESA-M4D331-A-2006 NYLON (TYPE 6) HEAT STABILIZED - FLEXIBLE - EXTRUSION GRADE TO BE USED WITH FORD WSS-M99P1111-A 《受热稳定的柔性挤塑级尼龙(型号6) 与标准FORD WSS-M99P1111-A一起使用 [替代为 FORD W.pdf

FORD ESA-M4D333-A-2009 POLYVINYL CHLORIDE TRANSPARENT MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《透明聚氯乙烯成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf