ONORM EN 28510-2-1993 Adhesives - Peel test for a flexible-bonded-to-ngid test specimen assembly - Part 2 180 peel (ISO 8510-2 1990)《粘合剂 软质与硬质粘合试样组件的剥离试验 第2部分：180度剥离(ISO 8510－2-199.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ANSI AGMA 2004-C08-2008 Gear Materials Heat Treatment and Processing Manual.pdf

ANSI AGMA 2007-C-2000 Gears - Surface Temper Etch Inspection After Grinding《齿轮.磨削后表面回火的浸蚀检验》.pdf

ANSI AGMA 2007-C00-2000 Gears -- Surface Temper Etch Inspection After Grinding.pdf

ANSI AGMA 2008-D11-2011 Assembling Bevel Gears.pdf

ANSI AGMA 2010-A94-1994 Measuring Instrument Calibration - Part I Involute Measurement《测量仪校准.第1部分 渐开线测量》.pdf

ANSI AGMA 2011-B14-2014 Cylindrical Wormgearing Tolerance and Inspection Methods.pdf

ANSI AGMA 2015-1-A-2002 Accuracy Classification System - Tangential Measurements for Cylindrical Gears《精度分类系统.圆柱形齿轮的切向测量法》.pdf

ANSI AGMA 2015-2-B15-2015 Gear Tooth Flank Tolerance Classification System C Definitions and Allowable Values of Double Flank Radial Composite Deviations.pdf

ANSI AGMA 2101-D04-2004 Fundamental Rating Factors and Calculation Methods for Involute Spur and Helical Gear Teeth.pdf