ONORM ISO 7 Teil 1-1984 Pipe threads where pressure-tight joints are made on the threads Designation dimensions and tolerances《非螺纹密封的管螺纹 命名、尺寸和公差》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CSN 02 1683-1955 Nuts for turnbuckles (short type)《开关螺母（短版）》.pdf

CSN 02 1706-1972 Washer for friction joints《摩擦接头用垫圈》.pdf

CSN 02 1724-1975 Four-edge washers for wood constructions《木材铺设用四边垫圈》.pdf

CSN 02 1728-1974 Square-hole Washers for wood constructions《木材铺设用方形孔垫圈》.pdf

CSN 02 1733-1979 Curved washer《曲线形垫圈》.pdf

CSN 02 1734-1979 Curved washer《曲线形垫圈》.pdf

CSN 02 1740-1971 Spring washers of square sectional area《方形断面的弹簧垫圈》.pdf

CSN 02 1741-1971 Spring washers of rectangular section area《矩形断面区域弹簧垫圈》.pdf

CSN 02 1754-1969 Locking washers《锁紧垫圈》.pdf