1、_SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising theref
2、rom, is the sole responsibility of the user.”SAE reviews each technical report at least every five years at which time it may be revised, reaffirmed, stabilized, or cancelled. SAE invites your written comments and suggestions.Copyright 2013 SAE InternationalAll rights reserved. No part of this publi
3、cation may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE.TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada)Tel: +1 724-776-4970 (out
4、side USA)Fax: 724-776-0790Email: CustomerServicesae.orgSAE WEB ADDRESS: http:/www.sae.orgSAE values your input. To provide feedbackon this Technical Report, please visithttp:/www.sae.org/technical/standards/AMS3715DAEROSPACE MATERIAL SPECIFICATIONAMS3715 REV. DIssued 1979-10Revised 2004-05Reaffirmed
5、 2013-07Superseding AMS3715CCore, Honeycomb, Glass/PhenolicRATIONALEAMS3715D has been reaffirmed to comply with the SAE five-year review policy.SAE INTERNATIONAL AMS3715D Page 2 of 12SAE INTERNATIONAL AMS3715D Page 3 of 12SAE INTERNATIONAL AMS3715D Page 4 of 12SAE INTERNATIONAL AMS3715D Page 5 of 12SAE INTERNATIONAL AMS3715D Page 6 of 12SAE INTERNATIONAL AMS3715D Page 7 of 12SAE INTERNATIONAL AMS3715D Page 8 of 12SAE INTERNATIONAL AMS3715D Page 9 of 12SAE INTERNATIONAL AMS3715D Page 10 of 12SAE INTERNATIONAL AMS3715D Page 11 of 12SAE INTERNATIONAL AMS3715D Page 12 of 12
