1、SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report isentirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising therefr
2、om, is the sole responsibility of the user.”SAE reviews each technical report at least every five years at which time it may be reaffirmed, revised, or cancelled. SAE invites your written comments and suggestions.Copyright 2012 SAE InternationalAll rights reserved. No part of this publication may be
3、 reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE.TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada)Tel: +1 724-776-4970 (outside USA)Fax:
4、 724-776-0790Email: CustomerServicesae.orgSAE WEB ADDRESS: http:/www.sae.orgSAE values your input. To provide feedbackon this Technical Report, please visithttp:/www.sae.org/technical/standards/AMS4095CAEROSPACEMATERIALSPECIFICATIONAMS4095 REV. CIssued 1969-11Revised 2004-11Reaffirmed 2012-04Superse
5、ding AMS4095BAluminum Alloy, Alclad Sheet and Plate6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06TiAlclad 2219-T31; Sheet, Solution Heat Treated and Cold WorkedAlclad 2219-T351; Plate, Solution Heat Treated and Stress Relieved(Composition similar to UNS A82219)RATIONALEAMS4095C has been reaffirmed to comply with the SAE five-year review policy.SAE AMS4095C Page 2 of 7SAE AMS4095C Page 3 of 7SAE AMS4095C Page 4 of 7SAE AMS4095C Page 5 of 7SAE AMS4095C Page 6 of 7SAE AMS4095C Page 7 of 7
