1、 SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising there
2、from, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be reaffirmed, revised, or cancelled. SAE invites your written comments and suggestions. Copyright 2012 SAE International All rights reserved. No part of this publication m
3、ay be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside U
4、SA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org SAE values your input. To provide feedback on this Technical Report, please visit http:/www.sae.org/technical/standards/AMS5732J AEROSPACE MATERIAL SPECIFICATION AMS5732 REV. J Issued 1963-01 Revised 2006-09 Reaff
5、irmed 2012-07 Superseding AMS5732H Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V Consumable Electrode Melted 1800 F (982 C) Solution and Precipitation Heat Treated (Composition similar to UNS S66286) RATIONALE AMS5732J has been reaffirmed to comply with the SAE five-year review policy. SAE AMS5732J Page 2 of 7 SAE AMS5732J Page 3 of 7 SAE AMS5732J Page 4 of 7 SAE AMS5732J Page 5 of 7 SAE AMS5732J Page 6 of 7 SAE AMS5732J Page 7 of 7
