1、SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising theref
2、rom, is the sole responsibility of the user.”SAE reviews each technical report at least every five years at which time it may be reaffirmed, revised, or cancelled. SAE invites your written comments and suggestions.Copyright 2012 SAE InternationalAll rights reserved. No part of this publication may b
3、e reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE.TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada)Tel: +1 724-776-4970 (outside USA)Fax
4、 724-776-0790Email: CustomerServicesae.orgSAE WEB ADDRESS: http:/www.sae.orgSAE values your input. To provide feedbackon this Technical Report, please visithttp:/www.sae.org/technical/standards/AMS5860FAEROSPACEMATERIALSPECIFICATIONAMS5860 REV. FIssued 1971-11Revised 2006-06Reaffirmed 2012-04Supers
5、eding AMS5860ESteel, Corrosion-Resistant, Sheet, Strip, and Plate12Cr - 8.5Ni - 0.30Cb - 1.1Ti - 2.0CuMultiple Melted, Solution Heat Treated, Precipitation Hardenable(Composition similar to UNS S45500)RATIONALEAMS5860F has been reaffirmed to comply with the SAE five-year review policy.SAE AMS5860F Page 2 of 6SAE AMS5860F Page 3 of 6SAE AMS5860F Page 4 of 6SAE AMS5860F Page 5 of 6SAE AMS5860F Page 6 of 6
