1、_SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising theref
2、rom, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be reaffirmed, revised, or cancelled. SAE invites your written comments and suggestions. Copyright 2012 SAE International All rights reserved. No part of this publication ma
3、y be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside US
4、A) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.orgSAE values your input. To provide feedback on this Technical Report, please visit http:/www.sae.org/technical/standards/AMS7493LAEROSPACEMATERIALSPECIFICATIONAMS7493 REV. L Issued 1951-06 Revised 2003-01 Reaffirmed
5、2012-10 Superseding AMS7493K Rings, Flash Welded Ferritic and Martensitic Corrosion-Resistant Steels RATIONALEThis document has been reaffirmed to comply with the SAE five-year review policy. SAE AMS7493L Page 2 of 6 SAE AMS7493L Page 3 of 6 SAE AMS7493L Page 4 of 6 SAE AMS7493L Page 5 of 6 SAE AMS7493L Page 6 of 6 PREPARED BY AMS COMMITTEE “F”
