1、AEROSPACE STANDARD CONNECTOR, RECEPTACLE, JAM NUT MOUNT, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING, CRIMP TYPE CONTACTS, CLASS A, F, AND E (SERIES 1)AS81511/23Copyright 2014 SAE International All rights reserved. No part of this publication may be reproduced, stored
2、 in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside USA) Fax: 724-776-0790 Em
3、ail: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org ISSUED 2014-10THIRD ANGLE PROJECTION CUSTODIAN: AE-8/AE-8C1 FEDERAL SUPPLY CLASS 5935AS81511/23SHEET 1 OF 4PROCUREMENT SPECIFICATION: AS81511SAE Technical Standards Board Rules provide that: “This report ispublishedby SAE toadvance thest
4、ate of technicalandengineering sciences. Theuse ofthisreportis entirelyvoluntary, andits applicability and suitability forany particular use,including any patent infringement arising therefrom, is thesole responsibilityoftheuser.”SAE reviews eachtechnicalreport at least every five years at which tim
5、e itmay berevised,reaffirmed, stabilized, orcancelled. SAE invites yourwrittencomments andsuggestions. SAE values your input. To provide feedbackon this Technical Report, please visit http:/www.sae.org/technical/standards/AS81511/23RATIONALE THIS DETAIL SPECIFICATION SHEET IS WRITTEN TO PERMIT THE C
6、ANCELLATION AND SUPERSESSION OF MIL-C-81511/23 WITH THIS DOCUMENT. NOTICE THE COMPLETE REQUIREMENTS FOR PROCURING THE PRODUCT DESCRIBED HEREIN SHALL CONSIST OF THIS DOCUMENT AND THE LATEST ISSUE OF AS81511. FIGURE 1 - CONNECTOR RECEPTACLE, JAM NUT MOUNT AEROSPACE STANDARD AS81511/23SHEET 2 OF 4CONNE
7、CTOR, RECEPTACLE, JAM NUT MOUNT, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING, CRIMP TYPE CONTACTS, CLASS A, F, AND E (SERIES 1)FIGURE 1A CONNECTOR RECEPTACLE, JAM NUT MOUNT TABLE 1 FIGURE 1 METRIC EQUIVALENTS INCHES MILLIMETERS INCHES MILLIMETERS INCHES MILLIMETERS IN
8、CHES MILLIMETERS .003 0.08 .067 1.70 .578 14.68 1.471 37.36 .005 0.13 .073 1.85 .602 15.29 1.531 38.89.006 0.15 .090 2.29 .894 22.71 .010 0.25 .094 2.39 .906 23.01 .015 0.38 .125 3.18 1.406 35.71 .020 0.51 .230 5.84 1.436 36.47 TABLE 2 FIGURE 1 DIMENSIONS/CONFIGURATION SHELLSIZEBDEFTHREADGACROSS FLA
9、TS KLACROSS FLAT NTHREADP LL 8.553(14.05).547(13.89) .430(10.92).424(10.77) .422(10.72).407(10.34) 1/2-28UNEF-2A.989(25.12) .969(24.61) 1.072(27.23) 1.052(26.72) .598(15.19) .590(14.99) 5/8-20UN-2A .640(16.26).630(16.00).610(15.49).600(15.24)10.678(17.22).672(17.07) .555(14.10).549(13.94) .548(13.92
10、).533(13.54) 5/8-28UN-2A 1.114(28.30) 1.094(27.79) 1.197(30.40) 1.177(29.90) .723(18.36) .715(18.16) 3/4-20UNEF-2A .765(19.43).755(19.18).735(18.67).725(18.42)14.928(23.57).922(23.42) .805(20.45).799(20.29) .798(20.27).783(19.89) 7/8-28UN-2A 1.401(35.59) 1.381(35.08) 1.510(38.35) 1.490(37.85) .973(2
11、4.71) .965(24.51) 1-20UNEF-2A 1.015(25.78)1.005(25.53).985(25.02).975(24.77)161.054(26.77)1.048(26.62) .930(23.63).924(23.47) .924(23.47).909(23.09) 1-28UN-2A 1.526(38.76) 1.506(38.25) 1.635(41.53) 1.615(41.02) 1.098(27.89) 1.090(27.69) 1 1/8-20UN-2A 1.140(28.96)1.130(28.70)1.110(28.19)1.100(27.94)1
12、81.178(29.92)1.172(29.77) 1.055(26.80)1.049(26.64) 1.048(26.62)1.033(26.24) 1 1/8-28UN-2A 1.651(41.94) 1.631(41.43) 1.745(44.32) 1.725(43.82) 1.222(31.04) 1.214(30.84) 1 1/4-20UN-2A 1.265(32.13)1.255(31.88)1.235(31.37)1.225(31.12)201.303(33.10)1.297(32.94) 1.180(29.97)1.174(29.82) 1.173(29.79)1.158(
13、29.41) 1 1/4-28UN-2A 1.776(45.11) 1.756(44.60) 1.870(47.50) 1.850(46.99) 1.347(34.21) 1.339(34.01) 1 3/8-20UN-2A 1.390(35.31)1.380(35.05)1.360(34.54)1.350(34.29)221.428(36.27)1.422(36.12) 1.305(33.15)1.299(32.99) 1.298(32.97)1.283(32.59) 1 3/8-28UN-2A 1.901(48.29) 1.881(47.78) 1.995(50.67) 1.975(50.
14、17) 1.472(37.39) 1.464(37.19) 1 1/2-20UN-2A 1.515(38.48)1.505(38.23)1.485(37.72)1.475(37.47)241.553(39.45)1.547(39.29) 1.430(36.32)1.424(36.17) 1.423(36.14)1.408(35.76) 1 1/2-28UN-2A 2.026(51.462.006(50.95) 2.120(53.85) 2.100(53.34) 1.597(40.56) 1.589(40.36) 1 5/8-20UN-2A 1.640(41.66)1.630(41.40)1.6
15、10(40.89)1.600(40.64)AEROSPACE STANDARD AS81511/23SHEET 3 OF 4CONNECTOR, RECEPTACLE, JAM NUT MOUNT, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING, CRIMP TYPE CONTACTS, CLASS A, F, AND E (SERIES 1)TABLE 2A FIGURE 1 DIMENSIONS/CONFIGURATION (CONTINUED) SHELLSIZEARBSCBRBSC
16、CR BSCDR BSCPANELO-RING EE BSC POSITION 1 2 3 4 5 6 8 105 140 215 265 AS3582-018 60 46 43 60 89 43 10 95 141 208 236 AS3582-020 53 87 51 77 87 87 14 95 141 208 236 AS3582-024 53 87 51 77 87 87 16 80 142 196 293 AS3582-026 98 98 98 98 98 98 18 80 142 196 293 AS3582-028 98 98 98 98 98 98 20 80 142 196
17、 293 AS3582-029 98 98 98 98 98 98 22 80 142 196 293 AS3582-030 98 98 98 98 98 98 24 80 142 196 293 AS3582-031 98 98 98 98 98 98 REQUIREMENTS: ALL REQUIREMENTS SHALL CONSIST OF THIS DOCUMENT AND THE LATEST ISSUE OF AS81511. 1. DESIGN: CONNECTORS SHALL BE DESIGNED IN ACCORDANCE WITH FIGURE 1 AND TABLE
18、 2. DIMENSIONS ARE IN INCHES AND APPLY AFTER PLATING. METRIC EQUIVALENTS ARE GIVEN FOR GENERAL INFORMATION ONLY AND ARE BASED ON 1 INCH = 25.4 MILLIMETERS. UNLESS OTHERWISE SPECIFIED, TOLERANCES ARE .016 INCHES. NORMAL MATING KEYWAY POSITION SHOWN IN FIGURE 1A. FOR ALTERNATE KEYWAY POSITIONS, SEE AS
19、81511, FIGURE 8. SLOTTED NUT SHALL CONFORM TO AS81511/20. 2. FOR INSERT ARRANGEMENTS, SEE AS81511, APPENDIX A. 3. PART NUMBER: THE CONNECTOR PART NUMBER WILL CONSIST OF THE LETTER M, THE BASIC SPECIFICATION NUMBER/APPLICABLE SPECIFICATION SHEET, AND THE APPLICABLE ALPHA-NUMERIC CHARACTERS ON THE CON
20、NECTOR SHELL. THE PART NUMBER SHALL BE FORMULATED AS IN THE FOLLOWING EXAMPLE: M81511/23ED01P1. M81511/23 E D 01 P 1 BASIC PART NUMBERCLASSSHELL SIZE INSERT ARRANGEMENT CONTACT DESIGNATOR KEY POSITIONS 4. SHELL POLARIZATION: 1 THROUGH 6 KEY POSITION. 5. INSERTION AND REMOVAL TOOLS: AS81969/2 INSERTI
21、ON TOOL, AS81969/3 REMOVAL TOOL. 6. MATING CONNECTOR: THIS RECEPTACLE MATES DIRECTLY WITH AN AS81511/26 PLUG. AEROSPACE STANDARD AS81511/23SHEET 4 OF 4CONNECTOR, RECEPTACLE, JAM NUT MOUNT, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING, CRIMP TYPE CONTACTS, CLASS A, F, A
22、ND E (SERIES 1)7. CONNECTOR WEIGHT: THE CONNECTOR REFERENCE WEIGHTS ARE LISTED IN TABLE 3. TABLE 3 CONNECTOR WEIGHT SHELL SIZE WEIGHT (REFERENCE - POUNDS) 1/ 24 (CODE J) .151 22 (CODE H) .137 20 (CODE G) .119 18 (CODE F) .100 16 (CODE E) .082 14 (CODE D) .070 10 (CODE B) .046 8 (CODE A) .035 1/ REMO
23、VABLE CRIMP CONTACTS NOT INCLUDED IN WEIGHT. APPLICATION NOTES: 1. AS81511 CONNECTORS AND ACCESSORIES ARE NOT RECOMMENDED FOR NEW DESIGN. SPECIFICATION NOTES: NOTICE THIS DOCUMENT REFERENCES A PART WHICH CONTAINS CADMIUM AS A PLATING MATERIAL. CONSULT LOCAL OFFICIALS IF YOU HAVE QUESTIONS CONCERNING
24、 CADMIUMS USE. 1. A CHANGE BAR (l) LOCATED IN THE LEFT MARGIN IS FOR THE CONVENIENCE OF THE USER IN LOCATING AREAS WHERE TECHNICAL REVISIONS, NOT EDITORIAL CHANGES, HAVE BEEN MADE TO THE PREVIOUS ISSUE OF THIS DOCUMENT. AN (R) SYMBOL TO THE LEFT OF THE DOCUMENT TITLE INDICATES A COMPLETE REVISION OF THE DOCUMENT, INCLUDING TECHNICAL REVISIONS. CHANGE BARS AND (R) ARE NOT USED IN ORIGINAL PUBLICATIONS NOR IN DOCUMENTS THAT CONTAIN EDITORIAL CHANGES ONLY.
