SANS 1660-2005 Correction fluids《修正液》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM E2497-2011(2017) Standard Practice for Calculation of Asset Movement Velocity (AMV)《设备运转速率(AMV)计算的标准实施规程》.pdf

ASTM E2499-2006 Standard Practice for Classification of Equipment Physical Location Information《设备物理位置信息分类的标准实施规程》.pdf

ASTM E2499-2011 Standard Practice for Classification of Asset Physical Location Information《设备物理位置信息分类的标准操作规程》.pdf

ASTM E2499-2018 Standard Practice for Classification of Asset Location Information.pdf

ASTM E2500-2007 Standard Guide for Specification Design and Verification of Pharmaceutical and Biopharmaceutical Manufacturing Systems and Equipment《制药学和生物制药学制造设备的规范、设计和认证用标准指南》.pdf

ASTM E2500-2007(2012) Standard Guide for Specification Design and Verification of Pharmaceutical and Biopharmaceutical Manufacturing Systems and Equipment《药物和生物药品生产系统和设备的质量标准 设计和确认.pdf

ASTM E2500-2013 Standard Guide for Specification Design and Verification of Pharmaceutical and Biopharmaceutical Manufacturing Systems and Equipment《制药和生物制药生产系统和设备的规范 设计与验证的标准指南》.pdf

ASTM E2501-2007 Standard Specification for Light Source Products for Inspection of Fluorescent Coatings《荧光粉涂层检验用光源产品的标准规范》.pdf

ASTM E2501-2011 Standard Specification for Light Source Products for Inspection of Fluorescent Coatings《荧光粉涂层检验用光源产品的标准规范》.pdf