SFS 2089-1966 《液化石油气瓶 阀门盖的螺纹》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM F2785-2009e1 Standard Specification for Polyamide 12 Gas Pressure Pipe Tubing and Fittings《聚酰胺12气压管、管材及管件的标准规范》.pdf

ASTM F2785-2010 Standard Specification for Polyamide 12 Gas Pressure Pipe Tubing and Fittings《聚酰胺 12 气压力管 软管及配件的标准规范》.pdf

ASTM F2785-2010a Standard Specification for Polyamide 12 Gas Pressure Pipe Tubing and Fittings《聚酰胺12燃气压力管 软管 和配件的标准规格》.pdf

ASTM F2785-2012 Standard Specification for Polyamide 12 Gas Pressure Pipe Tubing and Fittings《聚酰胺12气压力管 软管及配件的标准规范》.pdf

ASTM F2785-2018 Standard Specification for Polyamide 12 Gas Pressure Pipe Tubing and Fittings《聚酰胺12气压力管 软管及配件的标准规范》.pdf

ASTM F2786-2010 Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Gaseous Media Under Pressure (Pneumatic Leak Testing)《使用压力气体介质对聚乙烯(PE)压力.pdf

ASTM F2786-2016 Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Gaseous Testing Media Under Pressure (Pneumatic Leak Testing)《采用压力作用下试验介.pdf

ASTM F2787-2009 Standard Practice for Structural Design of Thermoplastic Corrugated Wall Stormwater Collection Chambers《热塑波纹壁雨水收集室结构设计的标准实施规程》.pdf

ASTM F2787-2011 Standard Practice for Structural Design of Thermoplastic Corrugated Wall Stormwater Collection Chambers《热塑波纹壁雨水收集室结构设计标准规程》.pdf