SIS SEN 30 02 63-1959 《船舶装置材料 矩形防护甲计划包》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 14815-1969 Go plain plug gauges with headpieces of diameter over 50 to 100 mm Design and dimensions《带顶梁直径为50-100 mm的通过规 设计和尺寸规格》.pdf

GOST 14816-1969 No-go plain plug gauges with headpieces of diameter over 50 to 100 mm Design and dimensions《直径50mm～100mm镶套止端塞规 结构及尺寸》.pdf

GOST 14817-1969 Stamped go plain plug gauges with headpieces of diameter over 50 to 100 mm Design and dimensions《带顶梁直径为50-100 mm的压制通过规 设计和尺寸规格》.pdf

GOST 14818-1969 Stamped no-go plain plug gauges with headpieces of diameter over 50 to 100 mm Design and dimensions《直径50mm～100mm镶套止端模压塞规 结构及尺寸》.pdf

GOST 14819-1969 No-go plain plug gauges with headpieces of not full-form with diameter from 50 to 100 mm Design and dimensions《带顶梁直径为50-100 mm的非全拼形式非通过规 设计和尺寸规格》.pdf

GOST 1482-1984 Square-head dog-point set screws Product grades A and B Construction and dimensions《方头及圆柱端定位螺钉 结构及尺寸》.pdf

GOST 14820-1969 Stamped go plain plug gauges of not full-form with diameter over 100 to 160 mm Design and dimensions《直径为100-160 mm的非全拼形式压制通过规 设计和尺寸规格》.pdf

GOST 14821-1969 Stamped no-go plain plug gauges of not full-form with diameter over 75 to 160 mm Design and dimensions《直径为75-160 mm的非全拼形式压制非通过规 设计和尺寸规格》.pdf

GOST 14822-1969 Go plain plug gauges of not full-form with diameter over 100 to 300 mm Design and dimensions《直径100mm～300mm不完整通端塞规 结构及尺寸》.pdf