SIS SEN 30 03 41 《瓷装置零件 环，1极，6mm回形针，500V》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM C1060-1990(2003) Standard Practice for Thermographic Inspection of Insulation Installations in Envelope Cavities of Frame Buildings《框架建筑物外壳内腔的绝热设施的温度记录检验》.pdf

ASTM C1060-2011 Standard Practice for Thermographic Inspection of Insulation Installations in Envelope Cavities of Frame Buildings.pdf

ASTM C1060-2011a Standard Practice for Thermographic Inspection of Insulation Installations in Envelope Cavities of Frame Buildings《框架建筑物外壳内腔的绝热设施的温度记录检验用标准实施规程》.pdf

ASTM C1060-2011a(2015) Standard Practice for Thermographic Inspection of Insulation Installations in Envelope Cavities of Frame Buildings《框架建筑包络腔中绝缘设施热成像检查的标准实施规程》.pdf

ASTM C1062-2000 Standard Guide for Design Fabrication and Installation of Nuclear Fuel Dissolution Facilities《核燃料溶解装置的设计、制造和安装标准指南》.pdf

ASTM C1062-2000(2008) Standard Guide for Design Fabrication and Installation of Nuclear Fuel Dissolution Facilities《核燃料溶解装置的设计、制造和安装的标准指南》.pdf

ASTM C1062-2000(2014) Standard Guide for Design Fabrication and Installation of Nuclear Fuel Dissolution Facilities《核燃料溶解设施的设计 制造和安装标准指南》.pdf

ASTM C1063-2006 Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster《内外侧置放硅酸盐水泥基灰泥的板条和衬条的安装标准规范》.pdf

ASTM C1063-2008 Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster《内外侧置放硅酸盐水泥基灰泥的板条和衬条的安装标准规范》.pdf