SIS SEN 36 02 50-1974 Overhead line crossings High voltage overhead line for max 45 kVabove public road Reinforced construction《架空交叉 公路上最大电压为45伏的高压架空线，钢筋结构》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD SK-M3G9523-A-1994 ADHESIVE TAPE POLYURETHANE CLEAR PAINTABLE HEAT RESISTANT《耐热可印刷透明聚氨酯胶带》.pdf

FORD SK-M3G9523-B1-2006 ADHESIVE TAPE POLYURETHANE CLEAR PAINTABLE STONE CHIP RESISTANT TO BE USED WITH FORD WSS-M99P111-A 《耐石击可印刷透明聚氨酯胶带 与标准FORD WSSS-M99P111-A一起使用》.pdf

FORD SK-M4A9003-AA-2009 SPECIAL BRAZING SPELTER SOLDER TO BE USED WITH FORD WSS-M99P1111-A 《专用黄铜钎焊焊料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD SK-M4A9003-AB-2009 SPECIAL BRAZING SPELTER SOLDER TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD SK-M4A9003-AA)《专用黄铜钎焊焊料 与标准FORD WSS-M99P1111-A一起使用 列于标准FORD SK-M4A9003.pdf

FORD SK-M4A9003-AC-2009 SPECIAL BRAZING SPELTER SOLDER TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD SK-M4A9003-AA)《专用黄铜钎焊焊料 与标准FORD WSS-M99P1111-A一起使用 列于标准FORD SK-M4A9003.pdf

FORD SK-M4D9799-B-2008 ABS PLATING GRADE HEAT RESISTANT TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD SK-M4D9799-A)《耐热电镀级丙烯腈-丁二烯-苯乙烯共聚物(ABS)(与FORD WSS-M99P1111-A一起使用) 见FORD .pdf

FORD SK-M4G9506-A-2013 EXPANDING SEALING STRIP SPOT WELDABLE HEAT CURING TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD SK-M4G9508-A-2009 SEALER WELDABLE EXPANDING HEAT CURING POLYACRYLIC ESTER TO BE USED WITH FORD WSS-M99P1111-A 《可焊、膨胀型热固化聚丙烯酸酯密封剂 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD SK-M4G9524-A-2009 VINYL SEALER HEAT CURING AIRLESS SPRAYABLE SOLVENT RELEASE TO BE USED WITH FORD WSS-M99P1111-A 《溶剂释放型可无气喷施的热固化乙烯基密封剂 与标准FORD WSS-M99P1111-A一起使用 》.pdf