SNI 01-3157-1992 Sorghum《红高粱》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 10587-1984 Uncured epoxy resins Specifications《未硬化环氧联苯树脂 技术条件》.pdf

GOST 1059-1972 Felted high boots Rules of acceptance and test methods《毡鞋 验收规则和试验贮存》.pdf

GOST 10590-1975 Sorted secondary raw material of blended fibres Specifications《分级的再生混合纤维原料 技术条件》.pdf

GOST 10594-1980 Equipment for arc resistance ultrasound and plasma treatment Series of parameters《弧焊接触焊 超声焊和火焰加工用的设备 参数系列》.pdf

GOST 10596-1977 Skins of hare white and hare grey dressed Specifications《熟白和熟灰白兔皮 规范》.pdf

GOST 10597-1987 Painting brishes Specifications《油漆刷 规范》.pdf

GOST 10598-1982 Air-water coolers for supercharged diesels and gas engines General specifications《增压柴油机和气体发动机用气 水冷却器 通用规范》.pdf

GOST 1060-1983 Cold-deformed seamless steel tubes for shipbuilding Specifications《造船用冷弯形无缝钢管 技术条件》.pdf

GOST 10602-1994 Hexagon head bolts with thread diameter over 48 mm Product grade B Specifications《B级精度螺纹直径 48mm六角头螺栓技术条件》.pdf