TCVN 7520-2005 Cocoa beans Determination of moisture content (Routine method)《可可豆 水分含量的测定(常规法)》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSS-M99P37-B-2014 PERFORMANCE LAMINATED IN-COLOR FILM MATERIALS CLASS A SURFACE EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M99P37-B-2016 PERFORMANCE LAMINATED IN-COLOR FILM MATERIALS CLASS A SURFACE EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M99P39-A1-2007 PERFORMANCE STEEL SHEET BORON TREATED ALUMINIZED HIGH STRENGTH (NORTH AMERICA APPLICATIONS) 1300 MPa MINIMUM ULTIMATE TENSILE STRENGTH - TO BE USED WITH FO.pdf

FORD WSS-M99P39-A1-2016 PERFORMANCE STEEL SHEET BORON TREATED ALUMINIZED HIGH STRENGTH 1300 MPa MINIMUM ULTIMATE TENSILE STRENGTH TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M99P39-A2-2007 PERFORMANCE STEEL SHEET BORON TREATED ALUMINIZED HIGH STRENGTH (NORTH AMERICA APPLICATIONS) 1400 MPa MINIMUM ULTIMATE TENSILE STRENGTH - TO BE USED WITH FO.pdf

FORD WSS-M99P39-A2-2016 PERFORMANCE STEEL SHEET BORON TREATED ALUMINIZED HIGH STRENGTH 1400 MPa MINIMUM ULTIMATE TENSILE STRENGTH TO BE USED WITH FORD WSS-M99P1111-A (Shown on FO.pdf

FORD WSS-M99P39-A3-2007 PERFORMANCE STEEL SHEET BORON TREATED ALUMINIZED HIGH STRENGTH (NORTH AMERICA APPLICATIONS) 1550 MPa MINIMUM ULTIMATE TENSILE STRENGTH - TO BE USED WITH FO.pdf

FORD WSS-M99P39-A3-2016 PERFORMANCE STEEL SHEET BORON TREATED ALUMINIZED HIGH STRENGTH 1550 MPa MINIMUM ULTIMATE TENSILE STRENGTH TO BE USED WITH FORD WSS-M99P1111-A (Shown on FO.pdf

FORD WSS-M99P39-A4-2007 PERFORMANCE STEEL SHEET BORON TREATED ALUMINIZED HIGH STRENGTH (NORTH AMERICA APPLICATIONS) 1600 MPa TYPICAL ULTIMATE TENSILE STRENGTH - TO BE USED WITH FO.pdf