1、TIA TELECOMMUNICATIONS SYSTEMS BULLETIN User Interface for Authentication Key Entry TSB-50 Reaffirmed December 6,2002 OMARCH 1993 TELECOMMUNICATIONS INDUSTRY ASSOCIATION Thc Tclccommunirations Industry Association rcprcrcnts the communications sector o -. NOTICE TIA Engineering Standards and Publica
2、tions are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for his particular nee
3、d. Existence of such Standards and Publications shall not in any respect preclude any member or nonmember of TIA from manufacturing or selling products not conforming to such Standards and Publications, nor shall the existence of such Standards and Publications preclude their voluntary use by those
4、other than TIA members, whether the standard is to be used either domestically or internationally. Standards, Publications and Bulletins are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any pate
5、nt owner, nor does it assume any obligation whatever to parties adopting the Standard, Publication, or Bulletin. Technical Bulletins are distinguished from TIA Standards or Documents, in that they contain a compilation of engineering data or information useful to the technical community, and represe
6、nt approaches to good engineering practices that are suggested by the formulating committee. This Bulletin is not intended to preclude or discourage other approaches that similarly represent good engineering practice, or that may be acceptable to, or have been accepted by, appropriate bodies. Partie
7、s who wish to bring other approaches to the attention of the formulating committee to be considered for inclusion in future revisions of this Bulletin are encouraged to do so. It is the intention of the formulating committee to review this document evey five years, but it maybe revised and updated a
8、t any time as may be occasioned by changes in technology, industry practice, or government regulations, or for other appropriate reasons. (From Project No. 3-3043, formulated under the cognizance of the TIA TR-45.3Subcommittee on Time Division Digital Technology) This Document was reaffirmed by the
9、Telecommunications Industry Association on December 6,2002. Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION 1993 Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS A
10、ND ENGINEERING PUBLICATIONS or call Global Engineering Documents, USA and Canada (1-800-854-7179) International (303-397-7956) or search online at http:/www.tiaonline.org/standards/search_n-order.cfm All rights reserved Printed in U.S.A. NOTICE OF DISCLAIMER AND LIMITATION OF LIABILITY The document
11、to which this Notice is affixed has been prepared by one or more Engineering Committees of the Telecommunications Industry Association (“TIA”). TIA is not the author of the document contents, but publishes and claims copyright to the document pursuant to licenses and permission granted by the author
12、s of the contents. TIA Engineering Committees are expected to conduct their affairs in accordance with the TIA Engineering Manual (“Manual”), the current and predecessor versions ofwhich are available at htti,:/m.tiaonline.ord/standards/sfg/engheerinP manual.cfm. TIAS function is to administer the p
13、rocess, but not the content, of document preparation in accordance with the Manual and, when appropriate, the policies and procedures of the American National Standards Institute (“ANSI”). THE USE OR PRACTICE OF CONTENTS OF THIS DOCUMENT MAY INVOLVE THE USE OF INTELLECTUAL PROPERTY RIGHTS (“IPR”), I
14、NCLUDING PENDING OR ISSUED PATENTS, OR COPYRIGHTS, OWNED BY ONE OR MORE PARTIES. TIA MAKES NO SEARCH OR INVESTIGATION FOR IPR. WHEN IPR CONSISTING OF PATENTS AND PUBLISHED PATENT APPLICATIONS ARE CLAIMED AND CALLED TO TIAS ATTENTION, A STATEMENT FROM THE HOLDER THEREOF IS REQUESTED, ALL IN ACCORDANC
15、E WITH THE MANUAL. TIA TAISES NO POSITION WITH REFERENCE TO, AND DISCLAIMS ANY OBLIGATION TO INVESTIGATE OR INQUIRE INTO, THE SCOPE OR VALIDITY OF ANY CLAIMS OF IPR. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF TH
16、E CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULARPURPOSE PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE
17、 OR REGULATION. OR USE, ITS MERCHANTABILITY AND ITS NON-INFRINGEMENT OF ANY THIRD TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSE
18、QUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF D
19、AMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. EIA TSBSO 93 3234b00 O505505 631 H Reproduced By GLOBAL ENGINEERING DOCUMENTS With h Permission d EIA Under Royalty Agreement TIA/EIA TELECOMMUNICATIONS SYSTE
20、MS BULLETIN User Interface for Authentication Key Entry TSBSO MARCH 1993 TELECOMMUNICATIONS INDUSTRY ASSOCIATION EIA TSBSO 93 = 3234600 O505506 578 NOTICE TIA/EIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufactur
21、ers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for his particular need. Existence of such Standards and Publications shall not in any respect preclude any member or nonmembe
22、r of TIA/EIA from manufacturing or selling products not conforming to such Standards and Publications, nor shall the existence of such Standards and Publications preclude their voluntary use by those other than TIA/EIA members, whether the standard is to be used either domestically or internationall
23、y. Recommended Standards, Publications and Bulletins are adopted by TIA/EIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA/EIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the
24、 Recommended Standard, Publication or Bulletin. Technical Bulletins are distinguished from TIA/EIA Recommended Standards or Interim Standards, in that they contain a compilation of engineering data or information useful to the technical community, and represent approaches to good engineering practic
25、es that are suggested by the formulating committee. This Bulletin is not intended to preclude or discourage other approaches that similarly represent good engineering practice, or that may be acceptable to, or have been accepted by, appropriate bodies. Parties who wish to bring other approaches to t
26、he attention of the formulating committee to be considered for inclusion in future revisions of this Bulletin are encouraged to do so. It is the intention of the formulating committee to revise and update this Bulletin from time to time as may be occasioned by changes in technology, industry practic
27、e, or government regulations, or for other appropriate reasons. (Formulated under the cognizance of the TIA TR-45.3 Subcommittee on Digital Cellular Standards.) Published by e TELECOMMUNICATIONS INDUSTRY ASSOCIATION 1993 Standards and Technology Department 2001 Pennsylvania Ave. N.W., Washington, D.
28、C. 20006 PRICE: Please refer to the current Catalog of EIA 21 as 29 35 3l P P 31 35 s EIA TSB5O 73 = 3234600 0505509 287 W TSBSO User Interface for Authentication Key Entry 2.1.4 User Programming the Authentication Key The user may hit “D” to leave programming mode at any time. The mobile station sh
29、aii leave programming mode after a reasonable period of inactivity. When a user has reached the authentication key programming mode and scrolled to the appropriate MIN, the user may prow the authentication key by pressing the six to twenty six digit number provided by the der. The display shall show
30、 the digits of the ented number as the user is in the process of keying in the complete number. If the user makes a mistake he may clear all or part of the entered number by using the “clear” button. When the complete digit sequence has been keyed, the user shall press “store“. “store” to store the
31、number. At this point the mobile station shall validate the authentication key based on the check sum. If the key is valid, the display shall provide positive acknowledgment, such as the word “OK”, and the phone shall return to its nod operating mode. If the key is invalid, the display shall provide
32、 negative feedback, such as the word “invalid”. At this point the user shall re-enter the number and continue the process until the authentication key is stored correctly. 2.1.5 Programming the Authentication Key at Installation Mobile stations may also be programmable at the time of installation th
33、rough the normal NAM programming mode. Manufacturers may implement this programming capability however they see fit. There is no need for a user interface standard in this area because it is presumed that NAM programming will be done by a qualified technician with access to the manufacturers instail
34、ation and service directions. Mobile stations shall allow NAM programming to be completed without entering an authentication key, in order to allow carriers to implement user programming programs. Mobile stations without displays or the required keys for user programming shall provide means for prog
35、ramming the A-key at the time of installation. 2.2 Revising the Authentication Key New Authentication Keys Overwrite Old From time to time the authentication key in a mobile station may require revision. if a new key is required, it would be entered using the same process as described above, and sha
36、ll overwrite the existing authentication key in the mobile stations memory. 2.3 Access to the Authentication Kev No Access to the Authentication Key Once an authentication key is entered, it may not, under any circumstances or in any mode of operation, be viewed through a mobile stations display or through any device attached to the mobile station. This includes the authentication key and NAM programming modes and any test modes as well as normal operation. Page 2