1、 TIA-1014-A May 2012Removable User Identity Module (R-UIM) Conformance Testing for Spread Spectrum Systems NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangea
2、bility and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling
3、 products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National
4、Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all ap
5、plicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. 3-0115-RV1, formulated under the cognizance of the TIA TR-45 Mob
6、ile (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may
7、involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention,
8、a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or
9、conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as r
10、espects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherw
11、ise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative
12、 Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute id
13、entification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with th
14、e contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTY
15、S INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY P
16、RODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, IN
17、CIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGO
18、ING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. 3GPP2 C.P0049-A v1.0 Revision History Revision Description of Changes Date C.S0049-0 v1.0 Initial release, v1.0 March 2004 C.S0049-0 v2.0 Ini
19、tial release, v2.0 June 2006 C.S0049-A v1.0 Revision A, v1.0 April 2012 3GPP2 C.P0049-A v1.0 i Table of Contents 1 1 Introduction 1-1 2 1.1 Scope . 1-1 3 1.2 Document Conventions . 1-1 4 1.2.1 Requirements Language . 1-1 5 1.2.2 Numbers and Strings . 1-2 6 1.3 Terminology 1-2 7 1.3.1 Definitions . 1
20、-2 8 1.3.2 Acronyms . 1-2 9 1.4 References 1-3 10 1.4.1 Normative References . 1-3 11 1.5 Recommended Practice . 1-4 12 1.6 Applicability . 1-4 13 1.6.1 Applicability of the Present Document . 1-4 14 1.6.2 Applicability of the Individual Tests 1-4 15 2 R-UIM Test Environment . 2-1 16 2.1 Common Init
21、ial Conditions . 2-1 17 2.2 Test Procedure 2-2 18 3 R-UIM Test Procedure 3-1 19 3.1 Physical Characteristics 3-1 20 3.1.1 Format and Layout . 3-1 21 3.1.1.1 ID-1 SIM 3-1 22 3.1.1.2 Plug-in SIM 3-1 23 3.1.2 Temperature Range for Card Operation . 3-1 24 3.1.3 Contacts 3-1 25 3.2 Signals and Transmissi
22、on Protocols 3-2 26 3.2.1 Supply Voltage Vcc (contact C1) 3-2 27 3.2.1.1 Voltage Limits 3-2 28 3.2.1.2 Current Limits . 3-2 29 3.2.1.3 Idle Current Limits . 3-2 30 3.2.1.4 Current Limits at All Frequencies . 3-2 31 3.2.1.5 Current Limits in Clk-stop-mode 3-2 32 3GPP2 C.P0049-A v1.0 ii 3.2.2 Reset RS
23、T (contact C2) . 3-2 1 3.2.2.1 Static Operation . 3-2 2 3.2.3 Clock CLK (contact C3) . 3-2 3 3.2.3.1 Frequency and Duty Cycle 3-2 4 3.2.3.2 Voltage and Current . 3-3 5 3.2.4 I/O (Contact C7) 3-3 6 3.2.4.1 Voltage and Current . 3-3 7 3.2.5 States 3-3 8 3.2.6 Answer To Reset (ATR) 3-3 9 3.2.6.1 ATR Co
24、ntent. 3-3 10 3.2.6.2 PTS Procedure 3-3 11 3.2.7 Major Capabilities 3-3 12 3.3 Logical Model 3-3 13 3.3.1 File Identifier 3-3 14 3.3.1.1 File-type Identification 3-3 15 3.3.1.1.1 Definition and Applicability . 3-3 16 3.3.1.1.2 Conformance Requirements 3-4 17 3.3.1.1.3 Test Purpose 3-4 18 3.3.1.1.4 M
25、ethod of Test 3-4 19 3.3.1.1.4.1 Initial Conditions . 3-4 20 3.3.1.1.4.2 Procedure 3-4 21 3.3.1.2 File ID Assignments 3-4 22 3.3.2 Dedicated Files . 3-4 23 3.3.2.1 Definition and Applicability. 3-4 24 3.3.2.2 Conformance Requirements 3-5 25 3.3.2.3 Test Purpose 3-5 26 3.3.2.4 Method of Test . 3-5 27
26、 3.3.2.4.1 Initial Conditions 3-5 28 3.3.2.4.2 Procedure . 3-5 29 3.3.3 Elementary Files 3-5 30 3.3.3.1 Definition and Applicability. 3-5 31 3.3.3.2 Conformance requirement 3-5 32 3GPP2 C.P0049-A v1.0 iii 3.3.3.3 Test Purpose 3-6 1 3.3.3.4 Method of Test . 3-6 2 3.3.3.4.1 Initial Conditions 3-6 3 3.
27、3.3.4.2 Procedure . 3-6 4 3.3.4 Methods for Selecting a File 3-7 5 3.3.4.1 Definition and Applicability. 3-7 6 3.3.4.2 Conformance Requirements 3-7 7 3.3.4.3 Test Purpose 3-8 8 3.3.4.4 Method of Test . 3-8 9 3.3.4.4.1 Initial Conditions 3-8 10 3.3.4.4.2 Procedure . 3-8 11 3.3.5 Reservation of File I
28、Ds 3-9 12 3.4 Security Features . 3-9 13 3.4.1 R-UIM Basic Security Related Functions . 3-9 14 3.4.1.1 Definition and Applicability. 3-9 15 3.4.1.2 Conformance Requirements 3-9 16 3.4.1.3 Test Purpose 3-10 17 3.4.1.4 Method of Test . 3-10 18 3.4.1.4.1 Initial Conditions 3-10 19 3.4.1.4.2 Procedure .
29、 3-10 20 3.4.2 File Access Conditions 3-10 21 3.4.2.1 Definition and applicability . 3-10 22 3.4.2.2 Conformance Requirements 3-10 23 3.4.2.3 Test Purpose 3-11 24 3.4.2.4 Method of Test . 3-11 25 3.4.2.4.1 Initial Conditions 3-11 26 3.4.2.4.2 Procedure . 3-11 27 3.5 Reserved . 3-12 28 3.6 Descriptio
30、n of the Commands . 3-12 29 3.6.1 Mapping Principles . 3-13 30 3.6.1.1 Definition and Applicability. 3-13 31 3.6.1.2 Conformance Requirements 3-13 32 3GPP2 C.P0049-A v1.0 iv 3.6.1.3 Test Purpose 3-13 1 3.6.1.4 Method of Test . 3-13 2 3.6.1.4.1 Initial Conditions 3-13 3 3.6.1.4.2 Procedure . 3-13 4 3
31、.6.2 Coding of the Commands . 3-14 5 3.6.2.1 SELECT Command . 3-14 6 3.6.2.1.1 Definition and Applicability . 3-14 7 3.6.2.1.2 Conformance Requirements 3-14 8 3.6.2.1.3 Test Purpose 3-15 9 3.6.2.1.4 Method of Test 3-15 10 3.6.2.1.4.1 Initial Conditions . 3-15 11 3.6.2.1.4.2 Procedure 3-15 12 3.6.2.2
32、 STATUS Command . 3-17 13 3.6.2.2.1 Definition and Applicability . 3-17 14 3.6.2.2.2 Conformance Requirements 3-17 15 3.6.2.2.3 Test Purpose 3-17 16 3.6.2.2.4 Method of Test 3-17 17 3.6.2.2.4.1 Initial Conditions . 3-17 18 3.6.2.2.4.2 Procedure 3-17 19 3.6.2.3 READ BINARY Command . 3-18 20 3.6.2.3.1
33、 Definition and Applicability . 3-18 21 3.6.2.3.2 Conformance Requirements 3-18 22 3.6.2.3.3 Test Purpose 3-18 23 3.6.2.3.4 Method of Test 3-18 24 3.6.2.3.4.1 Initial Conditions . 3-18 25 3.6.2.3.4.2 Procedure 3-18 26 3.6.2.4 UPDATE BINARY Command . 3-19 27 3.6.2.4.1 Definition and Applicability . 3
34、-19 28 3.6.2.4.2 Conformance Requirements 3-19 29 3.6.2.4.3 Test Purpose 3-20 30 3.6.2.4.4 Method of Test 3-20 31 3.6.2.4.4.1 Initial Conditions . 3-20 32 3GPP2 C.P0049-A v1.0 v 3.6.2.4.4.2 Procedure 3-20 1 3.6.2.5 READ RECORD Command . 3-21 2 3.6.2.5.1 Definition and Applicability . 3-21 3 3.6.2.5.
35、2 Conformance Requirements 3-21 4 3.6.2.5.3 Test Purpose 3-22 5 3.6.2.5.4 Method of Test 3-22 6 3.6.2.5.4.1 Initial Conditions . 3-22 7 3.6.2.5.4.2 Procedure 1 (ABSOLUTE and CURRENT modes) . 3-22 8 3.6.2.5.4.3 Procedure 2 (NEXT and PREVIOUS modes). 3-24 9 3.6.2.6 UPDATE RECORD Command . 3-25 10 3.6.
36、2.6.1 Definition and Applicability . 3-25 11 3.6.2.6.2 Conformance Requirements 3-25 12 3.6.2.6.3 Test Purpose 3-26 13 3.6.2.6.4 Method of Test 3-26 14 3.6.2.6.4.1 Initial Conditions . 3-26 15 3.6.2.6.4.2 Procedure 1 . 3-27 16 3.6.2.6.4.3 Procedure 2 . 3-28 17 3.6.2.7 SEEK Command. 3-30 18 3.6.2.7.1
37、 Definition and Applicability . 3-30 19 3.6.2.7.2 Conformance Requirements 3-31 20 3.6.2.7.3 Test Purpose 3-31 21 3.6.2.7.4 Method of Test 3-32 22 3.6.2.7.4.1 Initial Conditions . 3-32 23 3.6.2.7.4.2 Procedure 3-32 24 3.6.2.8 INCREASE Command . 3-34 25 3.6.2.8.1 Definition and Applicability . 3-34 2
38、6 3.6.2.8.2 Conformance Requirements 3-34 27 3.6.2.8.3 Test Purpose 3-35 28 3.6.2.8.4 Method of Test 3-35 29 3.6.2.8.4.1 Initial Conditions . 3-35 30 3.6.2.8.4.2 Procedure 3-35 31 3.6.2.9 VERIFY CHV Command 3-35 32 3GPP2 C.P0049-A v1.0 vi 3.6.2.9.1 Definition and Applicability . 3-35 1 3.6.2.9.2 Con
39、formance Requirements 3-36 2 3.6.2.9.3 Test Purpose 3-36 3 3.6.2.9.4 Method of Test 3-36 4 3.6.2.9.4.1 Initial Conditions . 3-36 5 3.6.2.9.4.2 Procedure 3-36 6 3.6.2.10 CHANGE CHV Command . 3-38 7 3.6.2.10.1 Definition and Applicability . 3-38 8 3.6.2.10.2 Conformance Requirements 3-38 9 3.6.2.10.3
40、Test Purpose 3-39 10 3.6.2.10.4 Method of Test 3-39 11 3.6.2.10.4.1 Initial Conditions . 3-39 12 3.6.2.10.4.2 Procedure 3-39 13 3.6.2.11 DISABLE CHV Command . 3-41 14 3.6.2.11.1 Definition and Applicability . 3-41 15 3.6.2.11.2 Conformance Requirements 3-41 16 3.6.2.11.3 Test Purpose 3-41 17 3.6.2.1
41、1.4 Method of Test 3-41 18 3.6.2.11.4.1 Initial Conditions . 3-41 19 3.6.2.11.4.2 Procedure 3-41 20 3.6.2.12 ENABLE CHV Command 3-43 21 3.6.2.12.1 Definition and Applicability . 3-43 22 3.6.2.12.2 Conformance Requirements 3-43 23 3.6.2.12.3 Test Purpose 3-44 24 3.6.2.12.4 Method of Test 3-44 25 3.6.
42、2.12.4.1 Initial Conditions . 3-44 26 3.6.2.12.4.2 Procedure 3-44 27 3.6.2.13 UNBLOCK CHV Command 3-46 28 3.6.2.13.1 Definition and Applicability . 3-46 29 3.6.2.13.2 Conformance Requirements 3-46 30 3.6.2.13.3 Test Purpose 3-46 31 3.6.2.13.4 Method of Test 3-47 32 3GPP2 C.P0049-A v1.0 vii 3.6.2.13.
43、4.1 Initial Conditions . 3-47 1 3.6.2.13.4.2 Procedure 1 . 3-47 2 3.6.2.13.4.3 Procedure 2 Destructive Test . 3-48 3 3.6.2.14 INVALIDATE Command 3-49 4 3.6.2.14.1 Definition and Applicability . 3-49 5 3.6.2.14.2 Conformance Requirements 3-49 6 3.6.2.14.3 Test Purpose 3-49 7 3.6.2.14.4 Method of Test
44、 3-49 8 3.6.2.14.4.1 Initial Conditions . 3-49 9 3.6.2.14.4.2 Procedure 3-49 10 3.6.2.15 REHABILITATE Command 3-50 11 3.6.2.15.1 Definition and Applicability . 3-50 12 3.6.2.15.2 Conformance Requirements 3-50 13 3.6.2.15.3 Test Purpose 3-51 14 3.6.2.15.4 Method of Test 3-51 15 3.6.2.15.4.1 Initial C
45、onditions . 3-51 16 3.6.2.15.4.2 Procedure 3-51 17 3.6.2.16 SLEEP Command . 3-52 18 3.6.2.16.1 Definition and Applicability . 3-52 19 3.6.2.16.2 Conformance Requirements 3-52 20 3.6.2.16.3 Test Purpose 3-52 21 3.6.2.16.4 Method of Test 3-52 22 3.6.2.16.4.1 Initial Conditions . 3-52 23 3.6.2.16.4.2 P
46、rocedure 3-52 24 3.6.2.17 STORE ESN_ME Command for RUIM_P_REV 2 3-52 25 3.6.2.17.1 Definition and Applicability . 3-52 26 3.6.2.17.2 Conformance Requirements 3-53 27 3.6.2.17.3 Test Purpose 3-53 28 3.6.2.17.4 Method of Test 3-53 29 3.6.2.17.4.1 Initial Conditions . 3-53 30 3.6.2.17.4.2 Procedure 1,
47、ME Usage Indicator Preference = 1 3-53 31 3.6.2.17.4.3 Procedure 2, ME Usage Indicator Preference = 0 3-55 32 3GPP2 C.P0049-A v1.0 viii 3.6.2.18 BASE STATION CHALLENGE Command . 3-56 1 3.6.2.18.1 Definition and Applicability . 3-56 2 3.6.2.18.2 Conformance Requirements 3-56 3 3.6.2.18.3 Test Purpose
48、 3-56 4 3.6.2.18.4 Method of Test 3-57 5 3.6.2.18.4.1 Initial Conditions . 3-57 6 3.6.2.18.4.2 Procedure 3-57 7 3.6.2.19 UPDATE SSD Command for Base Station Challenge 3-57 8 3.6.2.19.1 Definition and Applicability . 3-57 9 3.6.2.19.2 Conformance Requirements 3-57 10 3.6.2.19.3 Test Purpose 3-58 11 3
49、.6.2.19.4 Method of Test 3-58 12 3.6.2.19.4.1 Initial Conditions . 3-58 13 3.6.2.19.4.2 Procedure 3-58 14 3.6.2.20 CONFIRM SSD Command for Base Station Challenge 3-59 15 3.6.2.20.1 Definition and Applicability . 3-59 16 3.6.2.20.2 Conformance Requirements 3-59 17 3.6.2.20.3 Test Purpose 3-59 18 3.6.2.20.4 Method of Test 3-60 19 3.6.2.20.4.1 Initial Conditions . 3-60 20 3.6.2.20.4.2 Procedure 1, EFUSGIND bit 1 is set to 1. 3-60 21 3.6.2.20.4.3 Procedure 2, EFUSGIND bit 1 is set to 0. 3-61 22 3.6.2.21 AUTHENTICATE (RUN CAVE) Command . 3-63 23 3.6.2.21.1 Definition and Applicability .
