1、 TIA STANDARD Minimum Performance Specification for Terrestrial Mobile Multimedia Multicast Forward Link Only Transmitters TIA-1103 December 2006 TELECOMMUNICATIONS INDUSTRY ASSOCIATION Representing the telecommunications industry in association with the Electronic Industries Alliance Copyright Tele
2、communications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manuf
3、acturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member
4、or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopte
5、d by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all
6、 safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. 3-0239, formul
7、ated under the cognizance of the TIA, TR-47.1 Subcommittee on Terrestrial Mobile Multimedia Multicast based on Forward Link Only Technology). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 U.S.A. PRICE: Please refer
8、to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call Information Handling Services, USA and Canada (1-877-413-5187) International (303-397-2896) or search online at http:/www.tiaonline.org/standards/catalog/ All rights reserved Printed in U
9、.S.A. Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these documents either in hard copy or soft co
10、py (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/
11、www.tiaonline.org/standards/catalog/info.cfm#copyright OR Telecommunications Industry Association Standards (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in
12、 the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR co
13、nsisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope
14、 or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or
15、 represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, developmen
16、t or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or
17、 investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii)
18、 Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify,
19、inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPR
20、IATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE W
21、ITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for R
22、esaleNo reproduction or networking permitted without license from IHS-,-,-TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
23、 DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES I
24、S A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS
25、-,-,-TIA-1103 Minimum Performance Specification for TM3 Forward Link Only Transmitters CONTENTS i FOREWORD. ix 1 REFERENCES xi 2 1 OVERVIEW .1-1 3 1.1 Scope of This Document1-1 4 1.2 Requirements Language 1-1 5 1.3 Terms and Definitions .1-1 6 2 PHYSICAL LAYER MINIMUM STANDARDS2-1 7 2.1 Transmitter
26、Minimum Standards 2-1 8 2.1.1 Frequency Requirements .2-1 9 2.1.1.1 Frequency Coverage.2-1 10 2.1.1.2 Frequency Tolerance2-1 11 2.1.1.2.1 Definition.2-1 12 2.1.1.2.2 Method of Measurement.2-2 13 2.1.1.2.3 Minimum Standard2-2 14 2.1.2 Synchronization and Timing 2-2 15 2.1.2.1 Timing Reference .2-2 16
27、 2.1.2.1.1 Method of Measurement.2-2 17 2.1.2.1.2 Minimum standard 2-2 18 2.1.3 Modulation Requirements2-3 19 2.1.3.1 Modulation Error Ratio measurements 2-3 20 2.1.3.1.1 Definition.2-3 21 2.1.3.1.2 Method of Measurement.2-4 22 2.1.3.1.3 Minimum standard 2-6 23 2.1.3.2 Data channel transmission 2-6
28、24 2.1.3.2.1 Demodulation of WIC and LIC2-6 25 2.1.3.2.1.1 Definition .2-6 26 2.1.3.2.1.2 Method of Measurement.2-6 27 2.1.3.2.1.3 Minimum Standard 2-7 28 2.1.3.2.2 Demodulation of OIS Channels 2-7 29 2.1.3.2.2.1 Definition .2-7 30 2.1.3.2.2.2 Method of Measurement.2-7 31 Copyright Telecommunication
29、s Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Minimum Performance Specification for TIA-1103 TM3 Forward Link Only Transmitters CONTENTS ii 2.1.3.2.2.3 Minimum Standard2-7 1 2.1.3.2.3 Wide area data tra
30、nsmission2-7 2 2.1.3.2.3.1 Method of Measurement 2-7 3 2.1.3.2.3.2 Minimum standard 2-9 4 2.1.3.2.4 Local area data transmission .2-9 5 2.1.3.2.4.1 Method of Measurement 2-9 6 2.1.3.2.4.2 Minimum standard 2-10 7 2.1.3.3 Transmitter data loading .2-10 8 2.1.3.3.1 Definition.2-10 9 2.1.3.3.2 Method of
31、 Measurement 2-10 10 2.1.3.3.3 Minimum standard2-12 11 2.1.4 RF Requirements.2-12 12 2.1.4.1 Total Power2-12 13 2.1.4.1.1 Definition.2-12 14 2.1.4.1.2 Method of Measurement 2-13 15 2.1.4.1.3 Minimum standard2-13 16 2.1.4.2 Carrier Suppression 2-13 17 2.1.4.2.1 Definition.2-13 18 2.1.4.2.2 Method of
32、Measurement 2-13 19 2.1.4.2.3 Minimum standard2-13 20 2.1.4.3 I-Q Imbalance2-13 21 2.1.4.3.1 Definition.2-13 22 2.1.4.3.2 Method of Measurement 2-14 23 2.1.4.3.3 Minimum standard2-14 24 2.1.4.4 Phase Noise .2-14 25 2.1.4.4.1 Method of Measurement 2-14 26 2.1.4.4.2 Minimum standard2-14 27 2.1.4.5 Amp
33、litude Ripple.2-15 28 2.1.4.5.1 Definition.2-15 29 2.1.4.5.2 Method of Measurement 2-15 30 2.1.4.5.3 Minimum Standard .2-15 31 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TI
34、A-1103 Minimum Performance Specification for TM3 Forward Link Only Transmitters CONTENTS iii 2.1.4.6 Group Delay Variation .2-15 1 2.1.4.6.1 Definition.2-15 2 2.1.4.6.2 Method of Measurement.2-15 3 2.1.4.6.3 Minimum Standard2-16 4 2.1.5 Limitations on Emissions.2-16 5 2.1.5.1 Conducted Spurious Emis
35、sions .2-16 6 2.1.5.1.1 Definition.2-16 7 2.1.5.1.2 Minimum Standard2-16 8 2.1.5.2 Radiated Emissions .2-17 9 3 STANDARD TEST CONDITIONS 3-1 10 3.1 Standard Equipment .3-1 11 3.1.1 Basic Equipment .3-1 12 3.2 Standard Test Equipment3-1 13 3.2.1 Forward Link Only Network Equipment.3-1 14 3.2.1.1 Prot
36、ocol Support3-1 15 3.2.1.2 General Requirements .3-1 16 3.2.2 Forward Link Only Receiver Requirements 3-1 17 3.2.3 MER Measurement 3-1 18 3.2.3.1 Carrier Suppression Measurement.3-5 19 3.3 Functional System Setups.3-6 20 3.3.1 Functional Block Diagrams3-6 21 22 Copyright Telecommunications Industry
37、Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Minimum Performance Specification for TIA-1103 TM3 Forward Link Only Transmitters CONTENTS iv No text. 1 Copyright Telecommunications Industry Association Provided by
38、IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-1103 Minimum Performance Specification for TM3 Forward Link Only Transmitters TABLES v Table 2.1.1-1 Forward Link Only RF Channel Number and the Transmit Band 1 Frequencies2-1 2 Table 2.1
39、.1-2 Frequency tolerance requirements2-2 3 Table 2.1.2-1 Transmitter Timing requirements2-3 4 Table 2.1.3-1 Transmitter configuration for MER tests .2-5 5 Table 2.1.3-2 Test MLC configuration corresponding to MER test with 16 6 QAM/layered modulation energy ratio 4 constellations.2-5 7 Table 2.1.3-3
40、 Test MLC configuration corresponding to MER test with layered 8 modulation energy ratio 6.25 constellation .2-6 9 Table 2.1.3-4 Transmitter configuration for data channel tests.2-8 10 Table 2.1.3-5 Test MLC configuration for wide area channel data transmission tests .2-8 11 Table 2.1.3-6 Test MLC c
41、onfiguration for local channel data transmission tests.2-9 12 Table 2.1.3-7 Transmitter configuration for data loading tests2-11 13 Table 2.1.3-8 MLC configuration for data loading tests (5 MHz)2-11 14 Table 2.1.3-9 MLC configuration for data loading tests (6 MHz)2-11 15 Table 2.1.3-10 MLC configura
42、tion for data loading tests (7 MHz)2-12 16 Table 2.1.3-11 MLC configuration for data loading tests (8 MHz)2-12 17 Table 2.1.4-1 Phase noise mask .2-14 18 Table 2.1.4-2 Group Delay Variation Requirements2-16 19 Table 3.2.3-1 Number of active sub-carriers for different OFDM symbols .3-4 20 Table 3.2.3
43、-2 Accuracy of MER measurement equipment.3-5 21 22 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Minimum Performance Specification for TIA-1103 TM3 Forward Link Only Transmitt
44、ers TABLES vi No text. 1 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-1103 Minimum Performance Specification for TM3 Forward Link Only Transmitters FIGURES vii Figure 2.1
45、.3-1 MER Calculation .2-4 1 Figure 3.3.1-1 Functional Setup for MER test 3-6 2 Figure 3.3.1-2 Functional setup for transmitter loading and MLC decoding tests .3-6 3 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking per
46、mitted without license from IHS-,-,-Minimum Performance Specification for TIA-1103 TM3 Forward Link Only Transmitters FIGURES viii No text. 1 2 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without licens
47、e from IHS-,-,-TIA-1103 Minimum Performance Specification for TM3 Forward Link Only Transmitters FOREWORD ix (This foreword is not part of this Standard) 1 This specification provides a set of procedures that the Forward Link Only transmitter and 2 the Forward Link Only network can use to verify tha
48、t the transmitter meets the minimum 3 performance requirements. 4 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Minimum Performance Specification for TIA-1103 TM3 Forward Link Only Transmitters FOREWORD x No text. 1 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,