1、 TIA STANDARD Data Service Option for Spread Spectrum Systems TIA-707.12-B-1E (Addendum to TIA-707.12-B) June 2006 TELECOMMUNICATIONS INDUSTRY ASSOCIATION Representing the telecommunications industry in association with the Electronic Industries Alliance Copyright Telecommunications Industry Associa
2、tion Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facili
3、tating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manuf
4、acturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the
5、 American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated wit
6、h its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. 3-4617.12-RV2-AD1E, formulated under the cogn
7、izance of the TIA, TR-45.5 Subcommittee on Spread Spectrum Digital Technology). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIAT
8、ION STANDARDS AND ENGINEERING PUBLICATIONS or call Global Engineering Documents, USA and Canada (1-800-854-7179) International (303-397-7956) or search online at http:/www.tiaonline.org/standards/catalog/ All rights reserved Printed in U.S.A. Copyright Telecommunications Industry Association Provide
9、d by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyrig
10、ht permission. For copyright permission to reproduce portions of this document, please contact TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/www.tiaonline.org/standards/catalog/info.cfm#copyright OR Telec
11、ommunications Industry Association Standards (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or p
12、ractice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications a
13、re claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party
14、to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided i
15、n the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard
16、, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of
17、 assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications
18、 of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or ser
19、vices or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY A
20、ND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY O
21、R HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license fr
22、om IHS-,-,-TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFI
23、TS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND
24、THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-707.12-B-1E CONTENTS i 1 INTRODUCTION 1-1 1 1.1 Genera
25、l Description . 1-1 2 1.2 Terms 1-1 3 1.3 Normative References. 1-4 4 1.4 Overview of Packet Data Service. 1-5 5 1.4.1 Protocol Options. 1-5 6 1.4.1.1 Relay Layer RmInterface Protocol Option . 1-5 7 1.4.1.2 Network Layer RmInterface Protocol Option. 1-6 8 1.4.2 Packet Data Protocol States 1-7 9 1.4.
26、2.1 PDSN Link Layer Connection States . 1-7 10 1.4.2.2 Mobile Station Packet Data Service States 1-8 11 1.4.2.3 BS Packet Data Service States 1-9 12 2 RELAY LAYER . 2-1 13 2.1 Introduction. 2-1 14 2.2 UmInterface Requirements 2-1 15 2.2.1 RLP Requirements 2-1 16 2.2.2 Service and Call Control Proced
27、ures. 2-1 17 2.2.2.1 Mobile Station Procedures 2-1 18 2.2.2.1.1 Packet Data Service Control Procedures 2-1 19 2.2.2.1.1.1 Inactive State 2-1 20 2.2.2.1.1.2 Active State . 2-1 21 2.2.2.1.2 Packet Data Service Call Control Function 2-2 22 2.2.2.1.2.1 Null State 2-2 23 2.2.2.1.2.2 Initialization State
28、. 2-2 24 2.2.2.1.2.3 Connected State 2-3 25 2.2.2.1.2.4 Dormant State. 2-4 26 2.2.2.1.2.5 Reconnect State 2-6 27 2.2.2.2 BS/PCF Procedures 2-7 28 2.2.2.2.1 Packet Data Service Call Control Function 2-7 29 2.2.2.2.1.1 Null State 2-7 30 2.2.2.2.1.1.1 PCF Initiated Service Option Connection 2-7 31 Copy
29、right Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-707.12-B-1E ii 2.2.2.2.1.1.2 Mobile Station Originated Service Option Connection 2-8 1 2.2.2.2.1.2 Paging State 2-9 2 2.2.2.2.1.3
30、 Initialization State . 2-9 3 2.2.2.2.1.4 Connected State 2-10 4 2.2.3 Initialization and Connection of Packet Data Service Options . 2-10 5 2.2.3.1 Mobile Station Procedures 2-11 6 2.2.3.2 BS Procedures 2-13 7 2.2.4 Packet Data Dormant Timer Control. 2-13 8 2.2.5 Packet Zone Reconnection Control .
31、2-15 9 2.2.5.1 SID/NID Hysteresis 2-21 10 2.2.6 Strongest Pilot Monitoring and Reporting . 2-22 11 2.2.7 High Speed Operation 2-23 12 2.2.7.1 Mobile Station Procedures for Reverse High Speed Operation Using a 13 Supplemental Channel . 2-24 14 2.2.7.2 Reverse High Speed Operation Messages When Using
32、a Supplemental 15 Channel . 2-25 16 2.2.7.2.1 SCRM_REQ_BLOB Format 2-25 17 2.2.7.2.2 SCRMM_REQ_BLOB Format . 2-26 18 2.2.8 Quality of Service (QoS) 2-28 19 2.2.8.1 QoS Parameters 2-28 20 2.2.8.2 Mobile Station Procedures When Using QoS BLOB Type 0 2-33 21 2.2.8.3 Base Station Procedures When Using Q
33、oS BLOB Type 0. 2-43 22 2.2.9 Short Data Burst 2-47 23 2.2.9.1 Short Data Burst Procedures 2-47 24 2.2.9.2 Data Burst Message Format . 2-48 25 2.2.9.3 Short Data Burst Format 2-49 26 3 LINK LAYER 3-1 27 3.1 RmInterface Link Layer. 3-1 28 3.1.1 Link Layer Connection Open 3-1 29 3.1.2 Link Layer Conne
34、ction Closure. 3-1 30 3.2 PDSN Link Layer 3-1 31 3.2.1 Link Layer Connection Open 3-2 32 3.2.2 Link Layer Connection Closure. 3-2 33 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-
35、,-,-TIA-707.12-B-1E CONTENTS iii 4 NETWORK LAYER . 4-1 1 4.1 Internet Protocol Support for the PDSN Link Layer. 4-1 2 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-707.12-
36、B-1E iv FIGURES 1 Figure 1 Relay Layer RmInterface Protocol Option . 1-6 2 Figure 2 Network Layer RmInterface Protocol Option. 1-7 3 Figure 3 Packet Data Service Call Control States in the Mobile Station. 1-9 4 Figure 4 Packet Data Service Call Control States in the BS. 1-10 5 TABLES 6 Table 1 Valid
37、 Service Configuration Attributes for Service Option 33 and Service Option 7 66. 2-12 8 Table 2 Type-Specific Fields for Data Dormant Timer Control 2-13 9 Table 3 Dormant Timer Control Field 2-15 10 Table 4 Minimum Value of Mobile Station Dormant Timer. 2-15 11 Table 5 Type-Specific Fields for Packe
38、t Connection Control . 2-18 12 Table 6 Packet Zone Connection Control Field. 2-20 13 Table 7 Type-Specific Fields for Packet Zone Connection Response 2-21 14 Table 8 Type-Specific Fields for Strongest Pilot Monitoring and Reporting . 2-23 15 Table 9 Encoding of the PREFERRED_RATE 2-27 16 Table 10 En
39、coding of the DURATION Field 2-27 17 Table 11 Encoding of the RES_DATA Field. 2-28 18 Table 12 QoS Parameters Applicable to Service Option 33 and Service Option 66 for 19 QoS BLOB Type 0 . 2-29 20 Table 13 Mobile Station QoS BLOB 2-34 21 Table 14 QoS BLOB Type Included Indicator Values 2-35 22 Table
40、 15 User Priority Adjustment Values . 2-37 23 Table 16 Minimum User Data Rate Indicator Values . 2-38 24 Table 17 Minimum User Data Rate Values 2-39 25 Table 18 Minimum Data Loss Indicator Values 2-39 26 Table 19 Data Loss Rate Values 2-40 27 Table 20 Maximum Delay Indicator Values 2-41 28 Table 21
41、Maximum Delay Values. 2-41 29 Table 22 Base Station QoS BLOB When Using QoS BLOB Type 0. 2-44 30 31 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-707.12-B-1E 1-1 1 INTRODU
42、CTION 1 1.1 General Description 2 This chapter defines requirements for support of high speed packet data transmission 3 capability on cdma20001spread spectrum systems. Packet data transmission is 4 supported on cdma2000 Traffic Channels using primary or secondary traffic. For packet 5 data transmis
43、sion on traffic channels using Service Option 33 or Service Option 66, the 6 Radio Link Protocol Type 3 specified in C.S0017-0-2.10 is used. 7 This standard specifies a packet data bearer service for communication between terminal 8 equipment and a packet data serving node (PDSN) via a base station/
44、packet control 9 function (BS/PCF). 10 Packet data service options provide a means of establishing and maintaining Traffic 11 Channels for packet data service. Service Option 33 and Service Option 66 are used to 12 request packet data service through a PDSN supporting an Internet standard Point-to-P
45、oint 13 Protocol (PPP) interface to network layer protocols (see 4.1). Additional packet data service 14 options may be defined in future revisions to select other types of PDSN resources or 15 services. 16 1.2 Terms 17 Auxiliary Service Instance. A packet data service instance that is not used to p
46、erform 18 PPP negotiation (see 19). An auxiliary service instance uses service option number 66. 19 Base Station (BS). A fixed station used for communicating with mobile stations. 20 Depending upon the context, the term base station may refer to a cell, a sector within a 21 cell, or other part of th
47、e wireless system. 22 BS. See base station. 23 BS/PCF. The base station and packet control function considered as a single functional 24 entity. 25 CCPD. See Common Channel Packet Data. 26 Common Channel Packet Data. A mode of operation in which the MS and BS only use 27 Short Data Bursts transmitte
48、d on common channels to exchange packet data. This mode 28 can be used only while the mobile stations packet data service call control function is in 29 the Dormant State. A mobile station will request a direct-to-dormant transition if it intends 30 to use Common Channel Packet Data. 31 Data Circuit
49、 Terminating Equipment (DCE). A DCE connects a DTE to the network. A 32 typical DCE would be a V-series modem. 33 1cdma2000 is the trademark for the technical nomenclature for certain specifications and standards of the Organizational Partners (OPs) of 3GPP2. Geographically (and as of the date of publication),
