UIC O 526-3-2008 Wagons - Buffers with a stroke of 130 and 150 mm《货车 带130和150mm冲程的缓冲区》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SANS 1700-2-18-2003 Fasteners Part 2 Screw threads Section 18 ISO general purpose screw threads - Basic profile - Inch screw threads《紧固件 第2部分 螺纹 第18节 ISO普通螺纹 基本外形 英制螺纹》.pdf

SANS 1700-2-19-2003 Fasteners Part 2 Screw threads Section 19 ISO general purpose metric screw threads - Tolerances - Limits of sizes for hot-dip galvanized external screw threads th.pdf

SANS 1700-2-2-2003 Fasteners Part 2 Screw threads Section 2 ISO general purpose metric screw threads - General plan《紧固件 第2部分 螺纹 第2节 ISO普通公制螺纹 总体规划》.pdf

SANS 1700-2-20-2003 Fasteners Part 2 Screw threads Section 20 ISO general purpose metric screw threads - Tolerances - Limits of sizes for internal screw threads to mate with hot-dimu.pdf

SANS 1700-2-21-2004 Fasteners Part 2 Screw threads Section 21 Aerospace - MJ threads - General requirements《紧固件 第2部分 螺纹 第21节 航空-MJ螺纹 一般要求》.pdf

SANS 1700-2-22-2004 Fasteners Part 2 Screw threads Section 22 Aerospace - MJ threads - Limit dimensions for bolts and nuts《紧固件 第2部分 螺纹 第22节 航空 MJ螺纹-螺栓及螺帽极限尺寸》.pdf

SANS 1700-2-3-2003 Fasteners Part 2 Screw threads Section 3 ISO general purpose metric screw threads - Selected sizes for screws bolts and nuts《紧固件 第2部分 螺纹 第3部分 ISO普通公制螺纹 螺丝、螺栓及螺帽的.pdf

SANS 1700-2-4-1996 Fasteners Part 2 Screw threads Section 4 ISO general-purpose metric screw threads - Basic dimensions《紧固件 第2部分：螺纹 第4节：ISO一般用途米制螺纹 基本尺寸》.pdf

SANS 1700-2-5-2003 Fasteners Part 2 Screw threads Section 5 ISO general purpose metric screw threads - Tolerances - Principles and basic data《紧固件 第2部分：螺纹 第5节：ISO一般用途米制螺纹 公差 原则和基本数据.pdf