UNE 49 007 h3 《装量为5到12千克苹果的底面积为400 x 300 的木盒》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

NC 06-23-1968 Rounded-off sunk keys Screwed fixing《圆形嵌入键》.pdf

NC 06-24-1968 Taper keys and keyways《锥形键和键沟》.pdf

NC 06-25-1968 Taper keys with or without gib head《有钩头和无钩头的楔键》.pdf

NC 06-26-1967 Flathead and half headed nails Technical requirements《无头和半头钉 技术要求》.pdf

NC 06-27-1967 Flathead nails Dimensions《无头钉尺寸》.pdf

NC 06-28-1967 Half headed nails Dimensions《半头钉尺寸》.pdf

NC 06-29-1968 Clearence holes for bolts《干净的螺钉孔》.pdf

NC 06-30-1968 Radii under the head of metric bolts and screws《公制螺钉和螺丝头下的半径》.pdf

NC 06-31-1968 Tips of metric bolts and screws《公制螺钉和螺丝的尖端》.pdf