1、 IEC 60603-7-1 Edition 3.0 2011-04 INTERNATIONAL STANDARD NORME INTERNATIONALE Connectors for electronic equipment Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors Connecteurs pour quipements lectroniques Partie 7-1: Spcification particulire pour les fiches et les embase
2、s crantes 8 voies IEC 60603-7-1:2011 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2011 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopyin
3、g and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC
4、 member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sa
5、ns laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rs
6、idence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and re
7、lated technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-lin
8、e Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published detail
9、s twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in additional
10、languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.:
11、 +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publicati
12、ons CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous
13、permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publications de la CE
14、I. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 20 000 termes et dfinitions en anglais et en
15、franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des ques
16、tions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 60603-7-1 Edition 3.0 2011-04 INTERNATIONAL STANDARD NORME INTERNATIONALE Connectors for electronic equipment Part 7-1: Detail specification for 8-way, shielded, free and fixe
17、d connectors Connecteurs pour quipements lectroniques Partie 7-1: Spcification particulire pour les fiches et les embases crantes 8 voies INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE T ICS 31.220.01 PRICE CODE CODE PRIX ISBN 978-2-88912-446-6 Registered tradem
18、ark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale 2 60603-7-1 IEC:2011 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 General 7 Scope 7 1.1Normative references 7 1.2 2 Terms and definitions . 7 3 Common features and isometric view . 8 Isomet
19、ric view . 8 3.1Mating information . 8 3.2General . 8 3.2.1Fixed connector . 9 3.2.2Free connector 10 3.2.3 4 Cable terminations and internal connections Fixed and free connectors 11 Internal connections 11 4.1Cable termination 11 4.2 5 Gauges 11 6 Characteristics . 11 General . 11 6.1Pin and pair g
20、rouping assignment . 11 6.2Classification into climatic category . 11 6.3Electrical characteristics 12 6.4Creepage and clearance distances 12 6.4.1Voltage proof . 12 6.4.2Current-carrying capacity. 12 6.4.3Initial contact resistance Interface only (separable fixed and free 6.4.4 contact) . 12 Input
21、to output d.c. resistance . 12 6.4.5Input to output d.c. resistance unbalance. 12 6.4.6Initial insulation resistance 13 6.4.7Transfer impedance . 13 6.4.8Coupling attenuation 13 6.4.9Mechanical 13 6.5Mechanical operation 13 6.5.1Insertion and withdrawal forces . 13 6.5.2 7 Tests and test schedule 13
22、 General . 13 7.1Arrangement for contact resistance tests . 14 7.2Arrangement for vibration tests 14 7.3Test procedures and measuring methods 14 7.4Preconditioning . 14 7.5Wiring and mounting of specimens 14 7.6Wiring 14 7.6.1Mounting . 14 7.6.2Test schedules 14 7.7Basic (minimum) test schedule 14 7
23、.7.1Full test schedule 14 7.7.260603-7-1 IEC:2011 3 Annex A (normative) Gauging continuity test 21 Bibliography 25 Figure 1 Isometric view 8 Figure 2 Fixed connector details 9 Figure 3 Free connector view . 10 Figure A.1 Gauge. 23 Figure A.2 Gauge insertion 24 Table 1 Dimensions for Figure 2 10 Tabl
24、e 2 Dimensions for Figure 3 11 Table 3 Creepage and clearance distances 12 Table 4 Test group P . 15 Table 5 Test group AP . 16 Table 6 Test group BP . 17 Table 7 Test group CP . 18 Table 8 Test group DP . 19 Table 9 Test group GP . 20 Table A.1 Dimensions for Figure A.1 22 4 60603-7-1 IEC:2011 INTE
25、RNATIONAL ELECTROTECHNICAL COMMISSION _ CONNECTORS FOR ELECTRONIC EQUIPMENT Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotec
26、hnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specification
27、s, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, g
28、overnmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisi
29、ons or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for interna
30、tional use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In orde
31、r to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clea
32、rly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification b
33、odies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, prope
34、rty damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in t
35、his publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any
36、or all such patent rights. International Standard IEC 60603-7-1 has been prepared by subcommittee 48B: Connectors, of IEC technical committee 48: Electromechanical components and mechanical structures for electronic equipment. This third edition cancels and replaces the second edition, published in
37、2009, and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: 1) the correction, or inclusion, of technical references; 2) the harmonization of terminology with other parts of the IEC 60603-7 series and other refer
38、enced documents; 3) the modification of screen dimensions so as to include connectors on the market; 60603-7-1 IEC:2011 5 4) the inclusion of two new test groups (EP and FP) that provides the necessary cascading and references to other parts of the IEC 60603-7 series, and satisfies the requirements
39、of ISO/IEC 11801 to enable correct referencing. The text of this standard is based on the following documents: CDV Report on voting 48B/2163/CDV 48B/2209/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publi
40、cation has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts of the IEC 60603 series, under the general title Connectors for electronic equipment, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged
41、until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 6 60603-7-1 IEC:2011 INTRODUCTION Applications have emerged w
42、hich require the use of the interface described in IEC 60603-7 with certain performance specifications at higher frequencies. Therefore, a series of detail specifications have been issued in the past few years in support of these new applications. In order to improve readability and ease of maintena
43、nce, IEC subcommittee 48B (SC 48B) decided to rearrange and restructure these existing documents. This part of IEC 60603-7 contains only the necessary information regarding the shield of the connector and is designed to be used as a base document for all shielded connectors in the IEC 60603-7 series
44、. For further information regarding the IEC 60603-7 style connectors, reference is made to the unshielded base document IEC 60603-7. IEC 60603-7 is the base specification of the whole series. Subsequent specifications do not duplicate information given in the base document, but list only additional
45、requirements. The following illustration shows the structure of the IEC 60603-7 series: Indicates reference for transmission performance (backward compatibility) Indicates reference for dimensions, mechanical and electrical characteristics, tests and test schedules. Unshielded Shielded 3 MHz 100 MHz
46、 250 MHz 600 MHz IEC 60603-7 IEC 60603-7-1 IEC 60603-7-3 IEC 60603-7-4 IEC 60603-7-5 IEC 60603-7-7 500 MHz IEC 60603-7-41 IEC 60603-7-51 1000 MHz IEC 60603-7-71 IEC 60603-7-2 60603-7-1 IEC:2011 7 CONNECTORS FOR ELECTRONIC EQUIPMENT Part 7-1: Detail specification for 8-way, shielded, free and fixed c
47、onnectors 1 General Scope 1.1 This part of IEC 60603-7 covers 8-way shielded free and fixed connectors. It specifies the dimensions, mechanical, electrical and environmental characteristics and tests, in relation to the shield, additional to those in IEC 60603-7. These connectors are intermateable a
48、nd interoperable with other IEC 60603-7 series connectors as defined in IEC 60603-7. Normative references 1.2 The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of
49、 the referenced document (including any amendments) applies. IEC 60068-2-38, Environmental testing Part 2-38: Tests Test Z/AD: Composite temperature/ humidity cyclic test IEC 60512 (all parts), Connectors for electronic equipment Tests and measurements IEC 60512-1, Connectors for electronic equipment Tests and measurements Part 1: General IEC 60512-1-100, Connectors for electro
