1、 IEC 60627 Edition 3.0 2013-07 INTERNATIONAL STANDARD NORME INTERNATIONALE Diagnostic X-ray imaging equipment Characteristics of general purpose and mammographic anti-scatter grids quipements de diagnostic par imagerie rayonnement X Caractristiques des grilles antidiffusantes dusage gnral et de mamm
2、ographie IEC60627:2013 colourinsideTHIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2013 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
3、and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC m
4、ember National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans
5、 laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsid
6、ence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all
7、electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Useful links: IEC publications search
8、 - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on
9、all new IEC publications. Just Published details all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English a
10、nd French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service
11、Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu te
12、chnique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpub La recherche avance vous permet de trouver des publications CEI
13、en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications de la CEI. Just Published dtaille les n
14、ouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes q
15、uivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 60627 Edition 3.0
16、 2013-07 INTERNATIONAL STANDARD NORME INTERNATIONALE Diagnostic X-ray imaging equipment Characteristics of general purpose and mammographic anti-scatter grids quipements de diagnostic par imagerie rayonnement X Caractristiques des grilles antidiffusantes dusage gnral et de mammographie INTERNATIONAL
17、 ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE V ICS 11.040.50 PRICE CODE CODE PRIX ISBN 978-2-8322-0917-2 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained
18、 this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. colourinside 2 60627 IEC:2013 CONTENTS FOREWORD . 4 INTRODUCTION . 7 1 Scope . 8 2 Normative references . 8 3 Terms and definitions . 8 3.1 Grid definiti
19、ons 9 3.2 Geometric characteristics 10 3.3 Physical characteristics . 10 3.4 Other terms . 11 4 Structure of ANTI-SCATTER GRIDS . 12 5 Measurement and determination of physical characteristics 12 5.1 Method and arrangement for measurement . 12 5.1.1 Determination of physical characteristics . 12 5.1
20、2 Instrumentation 13 5.1.3 Phantoms 14 5.1.4 Arrangements 14 5.1.5 Radiation conditions 16 5.1.6 Constancy of source 16 5.2 Physical characteristics . 16 5.2.1 Measurements for the TRANSMISSION OF PRIMARY RADIATION (Tp). 16 5.2.2 Measurements for the TRANSMISSION OF SCATTERED RADIATION (Ts) 16 5.2.
21、3 Measurements for the TRANSMISSION OF TOTAL RADIATION (Tt) . 17 5.2.4 Calculation of the GRID SELECTIVITY () 17 5.2.5 Calculation of the CONTRAST IMPROVEMENT RATIO (K) 17 5.2.6 Calculation of the GRID EXPOSURE FACTOR (B) . 17 5.2.7 Calculation of the IMAGE IMPROVEMENT FACTOR (Q) . 17 5.2.8 Accuracy
22、 of measurements 17 6 Requirements for ANTI-SCATTER GRIDS . 18 6.1 Manufacturing tolerances 18 6.2 Determination of the APPLICATION LIMITS . 18 6.3 Accuracy of characteristics 18 6.3.1 GRID SELECTIVITY . 18 6.3.2 CONTRAST IMPROVEMENT RATIO . 18 6.3.3 GRID EXPOSURE FACTOR 18 6.3.4 IMAGE IMPROVEMENT F
23、ACTOR . 19 6.4 Markings and ACCOMPANYING DOCUMENTS 19 6.4.1 Data in ACCOMPANYING DOCUMENTS 19 6.4.2 Mandatory markings and indications for LINEAR GRIDS 19 6.4.3 Mandatory markings and indications for FOCUSED GRIDS . 19 6.4.4 Additional mandatory markings and indications . 19 6.4.5 Further requiremen
24、ts . 20 Annex A (normative) Calculation of the APPLICATION LIMITS . 27 Annex B (informative) Influence of scatter fraction on the physical characteristics . 30 Bibliography 32 Index of defined terms used in this standard . 33 60627 IEC:2013 3 Figure 1 Structure of ANTI-SCATTER GRIDS . 21 Figure 2 RA
25、DIATION DETECTOR . 22 Figure 3 Measurement arrangement for general purpose ANTI-SCATTER GRIDS with NARROW-BEAM CONDITION (determination of the TRANSMISSION OF PRIMARY RADIATION) . 23 Figure 4 Measurement arrangement for general-purpose ANTI-SCATTER GRIDS with BROAD BEAM CONDITION (determination of t
26、he TRANSMISSION OF SCATTERED RADIATION) 24 Figure 5 Measurement arrangement for MAMMOGRAPHIC ANTI-SCATTER GRIDS with NARROW-BEAM CONDITION (determination of the TRANSMISSION OF PRIMARY RADIATION) . 25 Figure 6 Measurement arrangement for MAMMOGRAPHIC ANTI-SCATTER GRIDS with BROAD BEAM CONDITION (det
27、ermination of the TRANSMISSION OF SCATTERED RADIATION) 26 Figure B.1 Physical characteristics as function of scatter fraction: SELECTIVITY (dash-dotted line), CONTRAST IMPROVEMENT RATIO K (dotted line), GRID EXPOSURE FACTOR B (dashed line), and IMAGE IMPROVEMENT FACTOR Q (solid line) . 31 4 60627 IE
28、C:2013 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ DIAGNOSTIC X-RAY IMAGING EQUIPMENT Characteristics of general purpose and mammographic anti-scatter grids FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electro
29、technical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specificat
30、ions, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International
31、 governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal deci
32、sions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for inter
33、national use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In or
34、der to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be cl
35、early indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification
36、 bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, pro
37、perty damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in
38、 this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying an
39、y or all such patent rights. International Standard IEC 60627 has been prepared by subcommittee 62B: Diagnostic imaging equipment, of IEC technical committee 62: Electrical equipment in medical practice. This third edition cancels and replaces the second edition published in 2001, and constitutes a
40、technical revision. In this revision calcium tungstate phosphor FLUORESCENT SCREENS, which are no longer available, have been replaced by gadolinium oxysulphide (GOS) FLUORESCENT SCREENS. Further, a new quality parameter is introduced: the IMAGE IMPROVEMENT FACTOR or Q-factor, which better describes
41、 the properties of the ANTI-SCATTER GRID, especially for digital detector applications. Further differences between this third edition and the previous second edition are: some definitions have been modified and others added to improve clarity, harmonization or generality; 60627 IEC:2013 5 new instr
42、umentation is prescribed for measurements of the TRANSMISSION OF PRIMARY RADIATION, the TRANSMISSION OF SCATTERED RADIATION and the TRANSMISSION OF TOTAL RADIATION, because FLUORESCENT SCREENS made of calcium tungstate phosphors are outdated and are no longer available; the definition of the PHANTOM
43、 used for measurements of the TRANSMISSION OF PRIMARY RADIATION, the TRANSMISSION OF SCATTERED RADIATION and the TRANSMISSION OF TOTAL RADIATION is modified and references to IEC 61267 are omitted; the RADIATION CONDITIONS used for the measurements have been adapted and are now the RQR and RQR-M con
44、ditions specified in IEC 61267:2005; tolerances are specified for the dimensions in the arrangements for the measurements of the TRANSMISSION OF PRIMARY RADIATION, the TRANSMISSION OF SCATTERED RADIATION and the TRANSMISSION OF TOTAL RADIATION. The text of this standard is based on the following doc
45、uments: FDIS Report on voting 62B/914/FDIS 62B/922/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. In this standard, the follow
46、ing print types are used: Requirements and definitions: roman type. Test specifications: italic type. Informative material appearing outside of tables, such as notes, examples and references: smaller type. Normative text of tables is also in a smaller type. TERMS DEFINED IN CLAUSE 3 OF THIS STANDARD
47、 OR IN OTHER IEC PUBLICATIONS REFERENCED IN THIS STANDARD: SMALL CAPITALS. In referring to the structure of this standard, the term “clause” means one of the numbered divisions within the table of contents, inclusive of all subdivisions (e.g., Clause 5 includes subclauses 5.1, 5.2, etc.); “subclause
48、 means a numbered subdivision of a clause (e.g., 5.1, 5.2 and 5.2.1 are all subclauses of Clause 5). References to clauses within this standard are preceded by the term “Clause” followed by the clause number. References to subclauses within this particular standard are by number only. In this stand
49、ard, the conjunctive “or” is used as an “inclusive or”, so a statement is true if any combination of the conditions is true. The verbal forms used in this standard conform to usage described in Annex H of the ISO/IEC Directives, Part 2. For the purposes of this standard, the auxiliary verb: “shall” means that compliance with a requirement or a test is mandatory for compliance with this standard; “should” means that compl
